Pipe Saddles for a Refinery in Chad

November 27, 2002
Pipe Saddles for a Refinery in Chad
Pipe Saddles for a Refinery in Chad

Piping Technology & Products, Inc. designed and manufactured these saddles for a power plant in Chad.

The saddles are comprised of bolt clamps, structural steel and vinyl pipe shields.  They were built for bare pipes ranging in size from 2 24 and can accommodate temperatures from 29 degrees C. to 538 degrees C.

Do you see a need for pipe saddles in your plant or refinery? Let us price them for you today!


request-a-quote


Read More

Straps for a Chemical Plant in Texas

November 22, 2002
Straps for a Chemical Plant in Texas
Straps for a Chemical Plant in Texas

Piping Technology & Products, Inc. recently designed and manufactured two strap assemblies for a chemical plant in Texas.

These 24′ x 8 straps are comprised of A516-70 plates, struts, pipe clamps, SCHXS and SCH160 pipe, and fabricated turnbuckles. This job was completed within two weeks to meet the customer’s quick turnaround requirements.

Do you require pipe straps in your piping system? Get pricing today!  

request-a-quote


Read More

Hot Shoes for a Chemical Plant in Texas

November 15, 2002
Hot Shoes for a Chemical Plant in Texas
Hot Shoes for a Chemical Plant in Texas

Piping Technology & Products, Inc. designed and manufactured 60 Marinite® hot shoes for a chemical plant in Texas.

These hot shoes are composed of Marinite®(high-density calcium silicate) and carbon steel.  They were made for 8 NPS with 7 insulation.  These shoes are used on steam lines, effluent lines, and any other process lines where it’s imperative that thermal energy is not lost through the pipe support.  Tests were performed to show outer skin temperature at operating conditions.

Want to learn more about hot shoes? Instantly view a pre-insulated pipe support webinar today.



access-our-webinar-archives



Read More

116,500 lbs. Load Big Ton Springs for a Petrochemical Plant

November 8, 2002
116,500 lbs. Load Big Ton Springs for a Petrochemical Plant
116,500 lbs. Load Big Ton Springs for a Petrochemical Plant

Piping Technology & Products, Inc. designed and manufactured 4 identical Big Ton springs for a petrochemical plant in Texas.

These 66 x 18 x 14.5 Big Ton springs are made of A-36 carbon steel and have a design suitable for temperatures up to 750 degrees F. They have a hot load capacity of 116,500 lbs and a cold load capacity of 94,500 lbs. Load tests were performed to ensure that the springs could safely sustain the specified design load. Applicable travel was ½ downward, but design travel ranges up to 6.

Want to learn more about big ton spring supports? View an engineered spring support webinar today!


access-our-webinar-archives



Read More
Top