24,500 lb. Load PTP- 8 Type C Variable Spring Assemblies

February 26, 2004

 

24,500 lb. Load PTP- 8 Type C Variable Spring Assemblies
24,500 lb. Load PTP- 8 Type C Variable Spring Assemblies

Piping Technology and Products, Inc. designed and manufactured four PTP-8 Type C variable spring assemblies for a power plant in South Carolina.  These variable spring assemblies with an average overall length of 87″ are fabricated from carbon steel. Each pipe hanger assembly consists of a variable spring, a rod, a clevis and hex nuts. The springs are designed for operating loads ranging from 22,500 lb. to 24,500 lb. and a total travel of 5″. For quality assurance, the spring coils are inspected and tested individually for proper operation.

Want to learn more about variable springs? Instantly view a variable spring webinar today!


access-our-webinar-archives



Read More

12,500 lb. Load Hydraulic Snubber and 24 Alloy Clamp Assembly

February 20, 2004
12,500 lb. Load Hydraulic Snubber and 24 Alloy Clamp Assembly
12,500 lb. Load Hydraulic Snubber and 24 Alloy Clamp Assembly

Piping Technology and Products, Inc. recently designed and manufactured a PTP Fig. 2100 Hydraulic Snubber and a Clamp Assembly for a power plant in California. The Hydraulic Snubber with a cylinder size of 2 1/2 dia. and a stroke of 5 is designed to support an operating load of 12,500 lbs. The 24 alloy clamp is designed to accommodate a temperature of 1078°F. The entire pipe hanger assembly was hydraulic tested prior to shipping.

Do you have a need for hydraulic snubbers? Let us price them for you today!
request-a-quote


Read More

Flexible Pipe Restraints for an Oil Refinery

February 13, 2004
Flexible Pipe Restraints for an Oil Refinery
Flexible Pipe Restraints for an Oil Refinery

Piping Technology and Products, Inc. designed and manufactured six flexible pipe restraints for an oil refinery in Texas.  These flexible pipe restraints, with the overall length ranging from 14″ to 30″, are designed to restrain movements of the piping system. They are manufactured by welding a 2 1/2″ SCH.80 galvanized casing pipe between 2×2 1/2″ flexible ball joints. Some also have a 2″ SCH. 80 pipe end welded to the swivel stem of the ball joints for length adjustments during installation.

Do you have a need for flexible pipe restraints like those described above? Get pricing now!
request-a-quote


Read More
Top