Piping Technology and Products, Inc. designed and manufactured 240 PT&P Figure 110 welded eye rods for an ammonia plant in Saudi Arabia. The rods will be attached to Type A variable springs designed to support loads from 850 lb. to 13,300 lb. Manufactured from A-36 carbon steel, the rods are 3/4 to 2 in diameter and range in length from 68 to 95. To prevent contamination at high temperatures, a red oxide primer with an alkyd topcoat was applied to the rods as per the customer’s request. Prior to shipment, a 100% dye-penetrant test was performed to ensure quality.Read More
Piping Technology and Products, Inc. recently designed and manufactured two HD-2 hold down clamps to fit a 16 pipe at an oil refinery in Michigan. These hold down clamps are designed to be used on pipe lines where there is a high temperature and great thermal movement requirements. They allow axial movement while restraining lateral movement. The clamp and base plate are fabricated from carbon steel with PTFE, 25% glass filled, bonded to the radius and plate.Read More
Piping Technology and Products, Inc. manufactured four 13,500 lb. Big Tons Springs for a chemical plant in Texas. These PTP-500 Big Ton Springs have a load capacity of 60,000 to 90,000 lb. are fabricated from A-36 carbon steel. They are designed for 750°F and a downward travel range of 3/16″ to 1/4″. These 37″ x 31″ x 30″ Big Tons will be used to support certain critical equipment with thermal expansion at the chemical plant. To assure quality, load testing was performed on the big tons prior to shipping.Read More
Updated Version of PHDS Download
Pipe Hanger Design Software (PHDS) is an easy-to-use program that allows you to easily generate CAD drawings of PT&P’s variables, constants, and rod hanger supports together with a complete bill of material. You may also send the drawings to firstname.lastname@example.org or 1+713-731-8640 (fax) for an immediate quote.
- Generate 2D drawings of variable, constant, and rod hanger pipe supports from a large selection of pre-defined assemblies Save drawings as .dwg filesUse an Excel datasheet to generate drawings in batch mode Add a location plan to the drawings in PHDS or through the Excel datasheetGenerate drawings in either FPS, Metric, or SI units
- Use a built-in function to submit drawing data to PT&P for quotation
Piping Technology and Products, Inc. recently designed and fabricated more than 75 pipe shoe and Bronzphite® slide plate assemblies for an oil refinery in Texas. Each assembly consists of two pipe clamps, a base plate and a maintenance free Bronzphite® slide plate. The pipe shoes with sizes ranging from 18 to 24 are fabricated from A387 alloy steel. They are designed for 965°F and 2 of horizontal movement.
The 3 x 3 Bronzphite® (graphite impregnated bronze) slide plates are self-lubricating bearing plates made of a high quality bronze with graphite filled grooves. They are designed for heavy loads, low velocity applications, and for situations where the use of oil or grease is undesirable or unfeasible.Read More