36" Cold Shoe Anchors for an LNG plant in Louisiana

November 28, 2007
36" Cold Shoe Anchors for an LNG plant in Louisiana
36" Cold Shoe Anchors for an LNG plant in Louisiana

 

36" Cold Shoe Anchors for an LNG plant in Louisiana
36" Cold Shoe Anchors for an LNG plant in Louisiana

These cold shoe anchors are designed to support pipe sizes ranging from 8″ to 36″ in diameter. The measurements of the base plate are between 18″ and 36″ in length and between 8″ and 22″ in width. The saddle is fabricated from stainless steel and the base plate is galvanized steel. Micarta insulation material, between the base plate and the saddle, functions to insulate the extremely cold pipeline. These cold shoe anchors are manufactured for large axial and lateral capacities.

Want to learn more about pre-insulated pipe supports? View a pre-insulated pipe support webinar today!


access-our-webinar-archives



Read More

7'- 6" Long Custom Variable Spring Hangers

November 21, 2007
7'- 6" Long Custom Variable Spring Hangers
7'- 6" Long Custom Variable Spring Hangers

These variable spring hangers were custom designed per customer specifications for a power plant in Turkey. The pipe hanger assembly measures 7′- 6″ long and the diameter of the can measures 12″. The variable spring hanger is capable of 55,137 lb. of hot load and 63,339 lb. of cold load. The assembly allows for 1″ upward travel.

In order to achieve the required spring rate, PT&P utilized a set of stacked coils (5 5/8″ O.D.) nested inside a larger coil. This produced an overall spring rate of 9,235 lb/in. The upper and lower attachments were minimized to fit within the space requirements provided.

Do you see a need for variable springs in your application? Get pricing today!
request-a-quote


Read More

60" Adjustable Pipe Stands for an LNG Plant

November 7, 2007

 

60" Adjustable Pipe Stands for an LNG Plant
60" Adjustable Pipe Stands for an LNG Plant

The stands were completed with a hot-dipped galvanize finish. They were also designed with a neoprene lining in the saddle to prevent metal to metal contact in the field. The function of the pipe stand is to allow for adjustment of the support after expansion or contraction of the pipeline. The simplicity of the design allows for easy installation and maintenance of the support.

Do you see a need for adjustable pipe stands in your current or upcoming project? Get pricing today!
request-a-quote


Read More
Top