A-Type Variable Spring Supports with a Load Capacity of 596 lb.

August 29, 2008

A-Type Variable Spring Supports with a Load Capacity of 596 lb.
A-Type Variable Spring Supports with a Load Capacity of 596 lb.

 

A-Type Variable Spring Supports with a Load Capacity of 596 lb.
Drawing of Variable Spring

Fabricated from A-36 carbon steel, these PTP-4 A-Type variable spring supports measure 6 5/8″ OD x 19 9/16″ in length with an installed load of 596 lb. They have a spring rate of 56 lb/in., and a downward travel of 1.375″. These supports are designed to suspend from a rod that is threaded through the upper portion of the variable (see Fig. PTP-4). This particular design is generally used to keep the variable further away from the beam to avoid interference.

Want to learn more about variable springs? Instantly view a past variables webinar!
access-our-webinar-archives

Read More

Stainless Steel Trunnions for an LNG Plant

August 13, 2008

Stainless Steel Trunnions for an LNG Plant
Stainless Steel Trunnions for an LNG Plant

These stainless steel trunnions are designed to support a vertical pipe used in an LNG plant. The trunnions will support stainless steel pipes with diameters ranging between 24″ and 42″. The diameter of the trunnions ranges in size from 12″ to 22″. The overall length is 34″. All of the weld seams were 100% dye-penetrant tested before being shipped to the plant.

Do you see a need for trunnions in your current or upcoming project? Get pricing!
request-a-quote

Read More
Top