Custom Sway Brace Supports

March 30, 2010
Custom Sway Brace Supports
Custom Sway Brace Supports

The sway braces will be used in pairs to support a 72″ diameter cooling tower supply line via a common attachment point. The internal components and housing are fabricated from carbon steel, and A-5160 spring steel was used for the coil. Each sway brace has a spring rate of 10,100 lb/in. with an overall available travel of 3″. The adjustable ends are configured so that one end bracket is interlocked with the mating end bracket of its sister sway brace; therefore, enabling them to be connected to the pipe by a single lug.

Do you require sway braces for an upcoming project? Let us price them for you today!
request-a-quote

Read More

Foam Glass – PUF Hybrid Cold Supports for 16″ Dia. Pipe

March 9, 2010
Foam Glass – PUF Hybrid Cold Supports for 16″ Dia. Pipe
Foam Glass – PUF Hybrid Cold Supports for 16″ Dia. Pipe

These foam glass-PUF hybrid insulated supports are designed for a temperature range of 77°F to -300°F. They are designed for a 16″ diameter pipe and have a load capacity of 11,050 lb. The 2-1/2″ thick insulation consist of foam glass on the upper half and polyurethane (PUF) on the bottom half. The clamps, ribs and base are fabricated from A-36 carbon steel.

Want to learn more about cold supports? Watch an instant webinar on cold shoes!
access-our-webinar-archives

Read More

22" Dia. Riser Clamps for a Power Plant

March 2, 2010
22″ Dia. Riser Clamps
22″ Dia. Riser Clamps

All four riser clamps are manufactured from A-36 carbon steel plates and are coated with red oxide primer for rust prevention. They are 22″ in diameter with each plate measuring 2″ thick by 12″ wide by 65″ long. Each riser clamp is capable of supporting loads of up to 38,000 lb. and will be used in a power plant to support “downcomer” lines.

Do you see a need for riser clamps in your current or upcoming project? Let us price them now!
request-a-quote

Read More
Top