Pipe Support Selection Chart

July 30, 2010

Over at the pipingtech.com website, we have added something new and useful to our online pipe support catalog.  Now, on various pages of our catalog, you will see comparison charts that aid you in selecting the optimal pipe support to fit your needs.

http://www.pipingtech.com/products/ptpcat/support/saddle/index.html

We hope this will be a useful tool and make the task of choosing the right pipe support a breeze!

We have also recently added a new drop-down navigation that allows you to easily browse through our catalog.

Head on over to our online catalog and check it out.  http://www.pipingtech.com/products/ptpcat/index.html

Read More

Insulated Trunnions for a LNG Plant

July 27, 2010

Insulated Trunnions for a LNG Plant

Piping Technology & Products, Inc. manufactured 29 insulated trunnions ranging in NPS from 1.5″ to 10″ with the larger trunnion measuring 54″ in height. The trunnions were fabricated from 304 stainless steel with Micarta insulation. They will be used in an LNG plant as insulated pipeline elbows.

Do you see a need for insulated trunnions in your plant? Get pricing today!
request-a-quote

Read More

Custom Chrome-Moly Three-Bolt Pipe Clamps for a Power Plant

July 20, 2010

Custom Chrome-Moly Three-Bolt Pipe Clamps for a Power Plant

The pipe clamps are manufactured from 2″ thick by 10″ wide Chrome-Moly (A387 Gr. 22) bar stock and alloy (A 193 Gr. B7) bolting of 2-3/4″ diameter throughout. They are designed for an operating temperature of 1065°F with a maximum design load rating of 35,000 lb. The pipe clamps will be used to support 24″ diameter pipe in a power plant.

Want to learn more about pipe clamps? Instantly view a past pipe clamp webinar!

access-our-webinar-archives


Read More

Custom U-Type Constant for an Oil Refinery

July 13, 2010

U-Type Constant Spring Support for an Oil Refinery

This custom designed carbon steel constant measures 19 5/8″ wide, by 59 1/2″ tall, by 52 1/8″ long. It is designed for a 500 lb. load with a total travel of 17 1/2″. The support frame was increased in height to meet a large take-off of 59 1/2″. The constant spring will be used to support piping in an oil refinery.

Do you have a need for custom constant springs? Let us price them for you today!
request-a-quote

Read More

Custom Sway Braces with Ball Joints for a Refinery

July 6, 2010
Custom Sway Braces with Ball Joints for a Refinery
Custom Sway Braces with Ball Joints for a Refinery

28 sway braces were custom designed from a combination of carbon steel and A-5160 spring steel. Custom design and fabrication was required due to the design loads and movements exceeding the largest standard sway brace assembly. The application required ball joint ends because the angle of incline exceeded the maximum five degree angle. The largest of the sway braces was designed for an operating load of 10,000 lb. with a travel range of 5″ in either compression or extension. Each sway brace was load and travel tested prior to shipping to ensure functionality throughout the entire travel range.

Do you require custom or standard sway braces in your plant? Get pricing today!
request-a-quote

Read More
Top