Custom Designed Upthrust Constant Spring Supports

March 20, 2015

Custom Designed Upthrust Constant Spring Supports

PT&P designed Fig. PTP 200-U upthrust constant spring supports modified to accommodate an increased installed height. PT&P fabricated these constant assemblies from A36 carbon steel. They were designed for temperatures up to 185°F, and a load of 15,737 lb. The constants are capable of a downward total travel of 2″ and are 61″ L x 25″ W x 39″ H. Standard load and travel tests were conducted prior to shipment.

Read More

Pipe Support Field Inspection, Installation & Maintenance Webinar

March 12, 2015

This webinar is over, view the recording at: http://info.pipingtech.com/field-services-webinars/

Field Service Technician Inspecting a Hydraulic SnubberThis Webinar will focus on installation and maintenance guidelines and offer valuable tips on inspecting a wide variety of pipe supports and expansion joints in your piping system. We will cover various pipe support applications and point out signs that indicate if a particular support needs replaced or adjusted. Obtain the knowledge you need to avoid the possibility of a potentially catastrophic situation. View examples of real world problems and see how we were able to solve them with timely and cost effective solutions.
Read More

14 Foot Long Sway Struts Custom Designed for a Natural Gas Facility in Canada

March 8, 2015

14 Foot Long Sway Struts Custom Designed for a Gas Facility in Canada

PT&P custom designed sway struts for a pipeline in a natural gas facility located in Canada. The sway struts are fabricated from carbon steel and include a painted finish for corrosion protection. The lengths range from 106″ to 173″. They are capable of supporting loads up to 8,000 lb. and are designed to restrain movement in one direction while providing movement due to thermal expansion or contraction in another direction.

Read More
Top