Custom Designed Pipe Hanger & Clamp Assemblies for a Flue-gas Desulfurization Application

June 29, 2015

Custom Designed Pipe Hanger & Clamp Assemblies for a Flue-gas Desulfurization Application

PT&P custom designed pipe hanger and clamp assemblies for a flue-gas desulfurization application in an energy facility located in Kansas. The assemblies are designed for pipes ranging in size from 2-1/2″ to 6″ in diameter, and are capable of a 650 lb. operating load. Materials include tube steel, fig. 92 washer, fig. 122 all threaded rod, fig. 30 turnbuckle, fig. 40 weldless eyenut and fig. 70 pipe clamp.

Read More

Insulated Pipe Supports Designed for Cryogenic and High Temperature Pipe Systems for an Ammonia Project

June 21, 2015

Insulated Pipe Supports Designed for Cryogenic and High Temperature Pipe Systems for an Ammonia Project

PT&P custom designed 98 insulated pipe supports for an ammonia project at a chemical plant in Louisiana. The supports were designed for cryogenic and high temperature pipe systems, with a 8″ to 22″ baseplate width and 10″ to 28″ saddle length. They were designed for pipe diameters of 6″-24″ and are comprised of polyurethane foam for cryogenic and FTM insulation for high temperatures. Standard Q.C. and dimensional tests were performed prior to shipment.

Read More

Stainless Steel Roller Stands Custom Designed for a Wastewater Treatment Plant

June 8, 2015

Stainless Steel Roller Stands Custom Designed for a Wastewater Treatment Plant

PT&P designed spring loaded stainless steel roller stands for a wastewater treatment plant. The rollers were custom designed for ease of assembly to support a 30″ diameter pipeline. They include eight springs in two spring housings and are designed for 1,000 lb. load. The base plate is 18-3/4″ x 13″ and the BOP is 10-3/16″. Roller stands are used to support pipelines that expand and contract longitudinally in the axial direction and where vertical adjustment is not necessary.

Read More
Top