Pipe Support Field Service – Problem Resolution Webinar

May 26, 2016

This webinar is over, view the recording in the webinar archives

Field Service Technician doing an InspectionIn this Webinar we explore the details of actual case studies focusing on various signs that indicate if a particular support needs replaced or adjusted. The presentation also covers projects that brought on new standard designs and custom designs for specific applications. And lastly, it includes valuable additions and procedures that extend the typical life span of a pipe support. PT&P’s field service division is available 24×7 in the case of an emergency situation or for a scheduled shut down.

Read More

Variable Spring Support with Bronzphite® Slide Plates Designed for a Facility in Canada

May 23, 2016

Variable Spring Support with Bronzphite® Slide Plates Designed for a Facility in Canada

PT&P manufactured these F-type variable spring supports for a facility in Canada. The springs are fabricated from A36 carbon steel with a hot-dipped galvanized finish. The variables installed heights range from 11″ to 15″ and are designed for operating conditions up to 4,000 lb. Bronzphite® is best suited for high loads, low velocity applications and where the use of oil or grease is undesirable or unfeasible. The bronze plate acts as the bearing surface, withstanding heavy loads, while the graphite inserts provide a solid, oil-free lubricant. As with all of our variable supports, these were quality checked with a 100% spring coil deflection test and a load cell calibration to set the assembly at the prescribed installed load.

Read More

Slide Plates & Pipe Rollers in the Fight Against Friction Webinar

May 12, 2016

This webinar is over, view the recording in our webinar archives.

Various Types of Slide PlatesDiscover the secret to a lower coefficient of friction while permitting translational motion or movement with the supporting element. Learn about the different types of slide plates and pipe rollers used for various applications. View the design, load capabilities, and installation and maintenance guidelines for both slide plates and pipe rollers. See numerous photos featuring combinations with other critical pipe supports in order to allow for movement or a low coefficient of friction. Increase your understanding of the value added services that are offered by PT&P, and rest assured that your slide plate and pipe roller needs can be taken care of by our 24×7 web-based emergency services, field service, and quick-turn around time when you need it most.

Read More

U-Type Constant Spring Supports Designed for an LNG Plant in Canada

May 6, 2016

U-Type Constant Spring Supports Designed for an LNG Plant in Canada

PT&P designed U-Type constant spring supports for an LNG plant in Canada. These are horizontal constants designed to support piping from below where the base plate is bolted directly to the top of the steel or the foundation using anchor bolts. These specific constant springs are designed to support an operating load of 67,420 lb. with 6” of total upwards travel. The constants are fabricated from galvanized carbon steel for protection against corrosion. Standard load and travel testing were completed to ensure the quality and performance of these constants.

Read More
Top