Hydraulic Snubbers for an Ammonia Plant in Louisiana

November 23, 2016

Hydraulic Snubbers for an Ammonia Plant in Louisiana

Type: Hydraulic Snubbers
Design: 3,000-15,400 lb load/5″-12″ stroke
Material: Carbon Steel
Size: 31″ up to 148″ pin-to-pin and cylinder diameters from 2.5″ to 5″

Piping Technology & Products designed these hydraulic snubbers for an ammonia plant in Louisiana. The snubbers ranged in length from 31″ up to 148″ pin-to-pin and cylinder diameters from 2.5″ to 5″. They are designed for an operating load raging from 3,000 lb. to 15,400 lb. and have a 5″ to 12″ stroke. Hydraulic snubbers are designed to protect the piping system when a sudden, heavy load is applied (such as an earthquake of high intensity), which can cause serious vibrations leading to damage and possible failure of the piping system.

Read More

Sway Strut and Pipe Clamp Assemblies Designed for an Energy Combustibles and Lubricants Facility

November 18, 2016

Sway Struts with Pipe Clamps for Energy Combustibles and Lubricants Facility in Argentina

Type: Sway Strut and Pipe Clamp Assemblies
Design: 4,500 lbs load
Material: A-36 Carbon Steel
Function: Let the pipe sway within a certain radius

Piping Technology & Products designed these Fig.2110F sway struts and pipe clamp assemblies for an energy combustibles and lubricants facility in Argentina. The sway struts are 60″ in length with clamp sizes of 16″ and 12″ diameters. All components were fabricated from A-36 carbon steel. They are designed for an operating load of 4,500 lb. The sway struts are designed to let the pipe sway within a certain radius. Read More

PT&P Designed Pipe Roller Stands for a Wastewater Treatment Plant

November 7, 2016

PT&P Designed Pipe Roller Stands for a Wastewater Treatment Plant

Type: Pipe Roller Stands
Design: 1,000 lb. Load | 30″ Dia. Pipe | 18-3/4″ x 13″ x 10-3/16″ BOP
Material: Stainless Steel
Function: For support of piping that expands and contracts longitudinally and where vertical adjustment is not necessary.

Piping Technology & Products, Inc. designed pipe roller stands fabricated from stainless steel for a wastewater treatment plant. Each roller has two spring housings with eight springs in each. They are designed for an operating load of 1,000 lb. on a 30″ diameter pipeline. The rollers measure 18-3/4″ x 13″ x 10-3/16″ BOP and went through quality control inspection and tests prior to shipment.

Read More
Top