ASME Defines Inspection Criteria for High Energy Piping

February 23, 2021

B31.1 Operations and Maintenance

According to ASME B31.1 Chapter VII Par. 140 a program shall be established for the assessment and documentation of the condition of all CPS (Covered Piping Systems) in power plants.

CPS Systems are defined in Chapter 1 Par 100.2, as systems on which condition assessments are to be conducted. This includes the following systems as a minimum.

NPS 4 and larger main steam, hot reheat steam, cold reheat steam, and boiler feedwater piping.

NPS 4 and larger systems that operate above 750°E (400°C or above 1,025 psi (7,100 kPa)

 

Other systems may be included as CPS by an Operating Company, based on their judgment. Appendix V of the code is titled ‘Recommended Practice for Operation, Maintenance, and Modification of Power Piping Systems’. This addendum is non-mandatory; however many  Power Industry operating companies’ insurance carriers are now invoking Appendix V with increasing frequency, and this is affecting the conditions of their agreements with the operating companies.

Piping Technology and Products Inc. (PT&P) has for some time been performing surveys and assessments in accordance with part H of Par. 140, which requires hot and cold walk-down readings and assessment of pipe supports, operated within the creep regime of the pipe.  These assessments are helpful in identifying, sagging lines, deformation of supports, and damage caused by upset conditions, and/or incidents, attributable to operational malfunctions, dynamic/thermal or hydraulic events.

PT&P has been performing this service for many power generation companies. Preparation of documentation, retrieval, and compilation of files for a CPS assessment, has just been completed for a major U.S power generation company. Ten large power plants were involved, and the original predominantly high-energy pipe support drawings, all engineered and designed by PT&P, were retrieved from PT&P archives dating back ten years.

We will be happy to answer any of your technical questions about our survey capabilities, as well as any other engineering or field services that your organization may need.

If you need assistance, we are available 24×7 for emergencies or reach our field service team directly.

 

Read More

Pipe Support Engineering & Design Webinar

April 28, 2016

This webinar is over, view the recording in the webinar archives

New Design for Insulated Pipe SupportThis presentation will cover pipe support design, 3D modeling, Finite Element Analysis, special stress and thermal cases, along with the unique cases that brought on new pipe support designs. Increase your understanding of the value-added services that are offered by PT&P, and rest assured that your Engineering and Design needs can be covered by our 24×7 web-based emergency services, providing field service, and quick-turn around time when you need it most.

Read More
Top