Compact Spring Supports Custom-Designed for Large Diameter Piping at a Chemical Plant

January 25, 2021

Compact Spring Supports Custom-Designed for Large Diameter Piping at a Chemical Plant

These compact spring supports were custom-designed to support large diameter piping at a chemical plant that manufactures ethylene, propylene, butadiene, benzene, propylene oxide, styrene monomer, and other derivatives and gasoline-blending products. They are designed for large loads (13,623 lb. to 24,038 lb.) and a small confined space with limited thermal movement (from 0.2″ to 0.3″). Compact spring supports (or disc springs) minimize excessive loads on sensitive equipment, so these types of spring support the same load as a conventional variable spring but with a smaller “working range” and utilizing 25-50% less space. They are ideal for locating under equipment flanges or other locations where space is limited. The housing is fabricated from A-36 carbon steel and hot-dipped galvanized to protect against corrosion. They have an installed height of 13″ – 15″ and are 21″ in diameter. The “disc springs” are engineered using stainless steel. Each assembly underwent load testing and other NDE prior to shipment.

Read More

Constant Spring Supports for Heat Recovery Steam Generators (HRSG)

January 4, 2021

Custom Constant Spring Supports for Heat Recovery Steam Generators

PT&P custom-designed constant spring support assemblies for heat recovery steam generator at a combined-cycle power plant. These power plants utilize gas turbines, steam turbines, heat exchangers along with other components to make use of “exhaust waste” for a more efficient system. These 200-F Type constants were fabricated from A36 carbon steel and include a hot-dipped galvanized finish. The spring coils are formed from alloy steel and are neoprene coated. They are designed for an operating load for up to 886 lb., and up to 6″ of maximum travel. They are placed beneath the unit being supported and allow for movement in the vertical direction (up or down). The dimensions are 13″ W x 31″ L x 18-1/2″ H. Standard load and travel tests along with a quality control inspection were conducted prior to shipment.

Read More
Top