Tag: Bolt Cradle Supports

Custom Designed Bolt Cradle Supports for a Chemical Plant in Texas

March 20, 2017

Custom Designed Bolt Cradle Supports For A Chemical Plant In Texas

Type: Custom Bolt Cradle Pipe Supports
Size: 24″ to 36″ Diameter Range
Material: Hot-dipped Galvanized Carbon Steel | Gasket Sealing Material
Testing: Dimensional and Visual Inspection

These supports are custom designed similar to a PTP Fig.900 bolt cradle support. They are fabricated from hot-dipped galvanized carbon steel and were designed for pipe sizes ranging from 24″ to 36″ in diameter. The assemblies include a gasket sealing material that will be installed between the pipe shoe and pipe. The pipe supports underwent dimensional and visual inspection, and stainless steel tags were riveted to the shoes prior to shipping to a chemical plant in Texas.

Bolt Cradle Supports with Slide Plates Designed for a Combined Cycle Facility

July 14, 2014

Bolt Cradle Supports With Slide Plates Designed For A Combined Cycle Facility

PT&P custom designed Fig. 900 bolt cradle supports with slide plates in 3 weeks for a combined cycle facility in Virginia. The supports are fabricated from carbon steel with a hot-dipped galvanized finish. They are 20″ long and range from 1’2-3/8″ to 1’6-7/8″ in height. The cradle supports are designed for an operating temperature range from 300°F to 530°F and are capable of supporting loads ranging from 1,340 lb. to 3,774 lb. with 0.05″ to 3.33″ of axial movement.

72 Bolt Cradle Pipe Supports Designed for a Sulphuric Acid Plant

December 30, 2013

72 Bolt Cradle Pipe Supports Designed For A Sulphuric Acid Plant

PT&P manufactured seventy-two bolt cradle pipe supports for a Sulphuric Acid Plant in Canada. The supports are designed for pipes ranging from 1-1/2″ to 20″ in diameter. They are fabricated from carbon steel and coated with a special protective paint for acid service. Standard bolt cradle supports are offered in 2″ to 24″ diameter pipe sizes; however, PT&P can manufacture any size needed for your application.

60 Bolt Cradle Supports

October 18, 2006
60 Bolt Cradle Supports
60 Bolt Cradle Supports

 

60 Bolt Cradle Supports
60 Bolt Cradle Supports

Piping Technology & Products, Inc. custom fabricated sixty bolt cradle supports in May 2006. The base was fabricated by welding two plates to form a “T.” This was used in place of a standard split “T.” By making simple modifications to a standard Figure 900 for two-inch pipe, such as heavier clamps and shortened base length, PT&P was able to meet the customer’s special requirements quickly and efficiently.

Do you require cradle supports for your current or future job? Get pricing today!
Request-A-Quote

Webinar General

Live New Webinar

Sign-up for a Live Technical Webinar…

Piping Design Course 300Width

Online Course

Piping Design and Analysis Influence on Pipe Support Selection and Design

Surveying a piping system? Need to change a current system?

This course is also great for…

• New Engineers, Management and Operations
• Field, Process, Maintenance and New Engineers
• Piping and Piping System Designers and/or Instructors

*This online course is approved for 8 hrs. P.E. Credits

Register Now
Top