Two 16 Dia. HD-2 Hold Down Clamps for an Oil Refinery

April 16, 2004
Two 16 Dia. HD-2 Hold Down Clamps for an Oil Refinery
Two 16 Dia. HD-2 Hold Down Clamps for an Oil Refinery

Piping Technology and Products, Inc. recently designed and manufactured two HD-2 hold down clamps to fit a 16 pipe at an oil refinery in Michigan.  These hold down clamps are designed to be used on pipe lines where there is a high temperature and great thermal movement requirements. They allow axial movement while restraining lateral movement. The clamp and base plate are fabricated from carbon steel with PTFE, 25% glass filled, bonded to the radius and plate.

Do you see a need for hold down clamps in your piping system? Get pricing today!
request-a-quote


Two Hundred HD-2 Hold Down Clamps

December 26, 2003
Two Hundred HD-2 Hold Down Clamps
Two Hundred HD-2 Hold Down Clamps

PT&P designed and manufactured two hundred and thirty HD-2 hold down clamps to fit 6” to 8” pipes at a chemical refinery. These hold down clamps are used on pipe lines where there is a high temperature and great thermal movement requirements, they allow axial movement and restrain lateral movement at the same time. The clamps are fabricated from carbon steel with 3/32” PTFE, 25% glass filled, bonded to the radius. The plates are manufactured from three layers of materials; 3/32” PTFE, 25% glass filled, 1/2” thick fabric belting material and carbon steel.

Want to learn more about hold down clamps? View a past pipe clamp webinar now!


access-our-webinar-archives



Top