Cable Tray Support Rack Fabricated for a Groundwater Remediation

August 30, 2021

Cable Tray Support Rack Fabricated for a Groundwater Remediation

PT&P provided a cable tray support rack to a groundwater treatment facility in California. Groundwater remediation is a process whereby groundwater is purified by removing pollutants and containments rendering the water useful for crop irrigation and industrial processes. Groundwater remediation techniques can include but are not limited to, oxygen gas injection, dual-phase extraction, membrane separation, carbon absorption, and chemical oxidation. Cable trays, used in this facility, were designed to suspend electrical cables, wiring, and small-bore piping throughout the facility. Cable trays are also used in biochemical plants, solar power plants, sports stadiums, green energy plants, as well as, traditional plants such as petroleum refineries, chemical and coal-fired power plants. As a general rule, cable trays protect and carry cable and wiring from point “A” to “B” inside the facility.

This section of cable tray in the photograph (blue in color) is 25’ long, 7’ wide, and 11’ tall completely assembled. It is fabricated from carbon steel and painted with a highly chemically resistant epoxy mastic designed for immersion conditions to protect against corrosion in marine or industrial conditions. PT&P can fabricate any combination of instrument stands and structural supports from floor mounts, wall mounts to secondary supports, and more. In addition, we have the capabilities to do what few other structural fabricators can do including:

– Complete Engineering designs including FEA (Ansys) and Structural Engineering (STAAD)
– Load Testing
– Incorporation of Contact Corrosion Solutions including TPI (half-round thermoplastic) and FRP
– Incorporation of Vibration Control Solutions
– Ability to fabricate with a wide variety of metals including all grades of Stainless and Nickel Super Alloys

PT&P has worked on and is working on some of the largest water remediation projects in the US where we have supplied expansion joints, variables, fire protection insulated supports, and structural pipe supports. Our ASME shop is large, local to the United States, and includes heavy-duty equipment and specially trained personnel with over 45 years of experience making this division of PT&P ideal for large-scale projects such as this structural support as we can leverage our massive manufacturing scale and expertise.

Over 1/2 a Million Instrument Stands for LNG Service and Operator

August 18, 2020

Over 1/2 a Million Instrument Stands for LNG Service and Operator

PT&P provided and designed instrument pipe stands in a multi-billion dollar high production liquefied national gas facility. In addition to LNG facilities, these floor mounted fabricated welded instrument stands are also used in a variety of applications including chemical plants and refineries. The units measure 40” wide by 54” high and are fabricated from A36 carbon steel with a hot-dipped galvanized finish fabricated locally in the United States. They are custom-designed with a vertical supporting section divided to yield two supporting sections. Their gusseted base design allows for the units to be either bolted to the foundation using anchor bolts or welded onto structural pipe rack steel. These primary modules can be used independently or together with secondary modules (such as cable mounts, elbow mounts, or u-bolt mounts) in order to display instrument indicators in any position.

Over 8,000 Instrument Stands Designed for an LNG Facility

December 22, 2014

Instrument Stands Designed to Mount Instrument Panels in an LNG Facility

PT&P manufactured custom instrument stands designed to mount instrument panels in an LNG facility located in Australia. We are supplying 8,000 assemblies fabricated from carbon steel with a hot-dipped galvanized finish. The average size measures 68″ in length, 22″ in width and 82″ in height. Total weight to be shipped is over 800,000 pounds. All assemblies underwent quality control inspection prior to shipment.

282 Instrument Supports Designed for a Six-Drum Coker Unit

October 26, 2013

282 Instrument Supports Designed for a Six-Drum Coker Unit

PT&P designed and manufactured 282 instrument supports to support a six-drum Coker unit in a refinery in Indiana. Some of the assemblies are designed to be bolted by anchor bolts while others are designed to be welded. The supports are fabricated from hot-dipped galvanized carbon steel and measure 11″ – 61″ in height and 5″ – 28″ in width.

Custom Instrument Supports Fabricated from Carbon Steel with a Hot Dipped Galvanize Finish

November 21, 2011

Custom Instrument Supports Fabricated from Hot Dipped Galvanized Carbon Steel

These custom instrument supports are fabricated from carbon steel with a hot dipped galvanize finish. The supports vary in heights up to 5′ and widths from 18″ to 24″. A total of 126 stands will be used to support instruments at an oil refinery. PT&P offers a complete line of adjustable and welded instrument supports in various mounting styles.

Custom Instrument Supports Fabricated from Hot Dipped Galvanized Carbon Steel

Do you see a need for instrument supports in a current or future  project of yours? Get pricing today! request-a-quote


New Instrument Support Catalog

March 5, 2011

We have a new  recently revamped instrument supports catalog! Our online catalog has a variety of new features that allow you to easily browse through our assortment of instrument stands:

– New color photos of instrument supports

– Selection chart to easily pick the best instrument stand for your application

– New indexes with thumbnails to quickly view a variety of supports

– Improved navigation to easily browse the site

Head on over to our site to check it out! Instrument Supports Catalog

643 Instrument Stands for an Oil Refinery

May 12, 2010
643 Instrument Stands
643 Instrument Stands

PT&P manufactured instrument stands from hot dipped galvanized carbon steel. The instrument stands are 52″ in height and have varying widths from 1 to 4′. They will be used to support instruments in a new Coker unit that is part of an oil refinery in Illinois.

Need some instrument stands to support the instruments in your plant? Get pricing now!
request-a-quote

Instrument Stands for a Heavy Oil Refinery

March 16, 2010
Instrument Stands for a Heavy Oil Refinery
Instrument Stands for a Heavy Oil Refinery

PT&P manufactured 55 instrument stands from carbon steel with a hot-dipped galvanize finish. They are 75″ tall and 90″ wide, and will support various instruments and junction boxes in a heavy oil refinery.

Want to learn more about instruments stands? Watch a instant webinar on our miscellaneous fabricated products!
access-our-webinar-archives

November 2003 News

November 4, 2003

Adjustable & Welded Instrument Components

Instrument Supports
Instrument Supports

Instrument Supports
Cable Mount

Piping Technology & Products, Inc. offers a complete line of adjustable and welded instrument supports in various mounting styles. Our instrument supports may be used independently or with secondary components to construct a custom support system. please refer to our catalog for details and ordering information.

Instrument Supports
U-bolt Mount
instrument support
Floor Mount

Do you require instrument components in your current or future job? Get pricing today!

request-a-quote


What is cable mounting?

January 11, 2002

Cable mounts, also known as Primary Support Modules (Instrument Supports), utilize adjustable, high-strength cables to clamp instrument assemblies to process lines 3″ through 36″ in diameter. These Primary Modules can be used independently or together with Secondary Modules to construct a universal support package for any instrument in any position.

 
Cable Mount
Cable Mount
Top