Cryogenic Supports with Micarta® Insulation for a LNG Facility in Australia

August 20, 2018

Cryogenic Supports with Micarta® Insulation for a LNG Facility in Australia

Type:  Insulated Pipe Supports “Cold Shoes”
Material:  CS | 304L SS | Micarta® Insulation
Size Ranges:  12-18″ L | 6-15″ W | 6-40″ H | 8-24″ Dia.
Design:  -320°F | Testing: PMI | Q.C. | MTR’s Provided

PT&P custom designed insulated supports for a cryogenic pipeline at an LNG facility in Australia. They are fabricated with 304L stainless steel plates and Micarta® G-10 insulation. Micarta® is designed to prevent LNG temperatures of -320°F from transferring to the base and surrounding pipe rack steel. The base plates are fabricated from carbon steel. These pipe saddles are designed to support pipes with dimensions ranging from 12”-18” in length, 6”-15” in width and 6”-40” in height. The nominal pipe size range is 8”-24” diameter. MTR’s were provided and non-destructive testing (PMI) was preformed, along with standard Q.C. inspection prior to shipment.

Cold Insulated Pipe Saddles with Slide Plates Designed for an Ethane Cracker at a Plant in Texas

August 29, 2016

Cold Insulated Pipe Saddles with Slide Plates Designed for an Ethane Cracker at a Plant in Texas

PT&P designed cold insulated pipe saddles with PTFE slide plates to provide sliding and guiding support for horizontal piping leading to an ethane cracker at a plant in Texas. The project fulfilled an emergency request when the client realized the product was missing at time of installation. The pipe saddles are fabricated from carbon steel with a hot-dipped galvanized finish for pipe sizes ranging from 3″ to 56″. They have a diameter of 40″, height of 23-5/8″, width of 42-1/2″ and 11-7/8″ BOP. Visual inspection and dimensional checks using a section of pipe were completed prior to shipment.

Top