Pre-Insulated Sliding Pipe Shoes Designed with FRP Lining and Firetemp® Insulation for High-Temperature Pipelines

February 3, 2020

 

Pre-Insulated Sliding Pipe Shoes Designed with FRP Lining and Firetemp® Insulation for High-Temperature Pipelines

Type: Pre-Insulated Sliding Pipe Shoe | High-Temperatures
Size: 15″ Long | 4″ B.O.P. | 1-1/2″ – 3″ Dia.
Material: Firetemp® Insulation | HDG CS | SS on Polyethylene
Testing: Q.C. Inspection & Tests

PT&P custom designed pre-insulated sliding pipe shoes with FRP lining for high-temperature pipelines in Ohio. The “hot shoes” are 15” long, range in diameter from 1-1/2” to 3” and are designed for a B.O.P. of 4”. The shoes are designed with Firetemp® insulation for temperatures up to 1800°F. The supports are fabricated from carbon steel with a hot-dipped galvanized finish and include stainless on polyethylene slide plates. A visual inspection was performed prior to shipping.

Cryogenic Pipe Supports Designed for an Ammonia Plant

November 5, 2019

 

Cryogenic Pipe Supports Designed for an Ammonia Plant

Type: Cryogenic Pipe Supports
Size: 14” L x 4″ W x 6″ H | 2″ Dia. | 2″ Thick Insulation
Material: Polyurethane & Foam Glass | Galvanized Steel
Testing: Q.C. Inspection & Tests

PT&P manufactured multiple pre-insulated pipe supports for cryogenic temperatures in an ammonia plant in Louisiana. These cryogenic pipe supports, also known as “cold shoes” are designed with 2” thick polyurethane and foam glass for insulation and fabricated from galvanized steel for the shoe, with alloy bolts and nuts. They are 2” diameter 14″ L X 4″ W X 6″ H. These insulated supports are designed for insulating and supporting temperatures down to -300°F with a PSI of 200 to 800. Q.C. inspection and tests were performed prior to shipment.

Pre-Insulated Cryogenic Supports for a Propylene Dehydrogenation Application at a Petrochemical Plant in Texas

February 12, 2018

Pre-Insulated Cryogenic Supports for a Propylene Dehydrogenation Application at a Petrochemical Plant in Texas

Type: Pre-Insulated Cryogenic Supports
Size: 12” Long Base | 32” Wide Base | 62″ Overall Height | 18” Long Insulation
Material: Polyurethane | Carbon Steel w/ HDG Finish
Design: Operating Temperature -360°F & 42″ NPS
Testing: Standard Quality Control

Piping Technology and Products, Inc. and custom designed two pre-insulated cryogenic supports for a propylene dehydrogenation application at a petrochemical plant in Texas. The insulation is made from a high density polyurethane Insulation, with the bearing plates and side bumpers fabricated from carbon steel with an HDG finish. The shoes are capable of insulating and supporting at temperatures as low as -360°F. These were designed to support pipeline diameter of 42” with overall height of 62” diameter. Regular quality control tests were performed with a standard turn-around time.

Cryogenic Pipe Supports Designed for a Facility in Massachusetts

September 11, 2017

Cryogenic Pipe Supports Designed for a Facility in Massachusetts

Type: Cryogenic Pipe Supports
Material: Carbon Steel | Polyurethane
Design: -320°F | 36″ – 48″ Dia. | 52″ W x 57″ H x 67″ L

PT&P received an order to custom design 16 cryogenic pipe supports for a contractor in Massachusetts. They needed a pipe forming a T-section lined with insulation and trimmed to accommodate the pipe perpendicular to the shoe length. The overall dimensions of the order are pipe sizes ranging from 36″ to 48″ in diameter, 52″ width and 57″ to 67″ height. Our insulation is designed to support the pipe and its contents. When insulated pipes are supported, the weight of the pipe, the contents, the operating temperature, and the amount of energy loss must be considered. In order to support the pipe and minimize energy loss from heat transfer, a pre-insulated pipe support is necessary. If the material in the pipe is high temperature such as high pressure steam or heating oil, then high temperature insulation is required, and these supports are called hot shoes. If the material is cold, such as liquefied natural gas, cooling water or ammonia, then low temperature insulation is needed, and these types of supports are called cold shoes.

3-Layer Cryogenic Pipe Shoes for a Light Hydrocarbon Chemical Plant in Texas

June 10, 2017

3-Layer Cryogenic Pipe Shoes for a Light Hydrocarbon Chemical Plant in Texas

Type: Pre-Insulated Pipe Supports for Cryogenic Temperatures
Size: 5.5″ of Insulation / Clamps are 12″ wide
Material: Polyurethane Foam and Carbon Steel with HDG Finish
Design: 18″ Pipe and Cryogenic Operating Temperatures
Testing: Standard Quality Control Tests

These 3-layer pre-insulated cryogenic pipe shoes were custom fabricated by Piping Technology& Products for a light hydrocarbon chemical plant in Texas. The insulation foam is made from polyurethane and the rest of the shoe components from carbon steel with HDG finish. The cold shoes are designed for 18″ pipe, the 3-layers of insulation total is 5.5″ thick, the clamps are 12″ wide, and cryogenic operating temperature. Standard quality control tests were performed prior to shipment.

Cryogenic Insulated Pipe Supports Designed for a Petrochemical Complex in Louisiana

March 27, 2017

Cryogenic Pipe Supports Designed for a Petrochemical Complex in Louisiana

Type: Pre-Insulated Pipe Supports for Cryogenic Application
Size: 46″ – 52″ Diameter Range | 10 lb. & 20 lb. Density PUF Foam
Material: Hot-dipped Galvanized Carbon Steel | PUF | Polyester Film & Aluminum Foil
Testing: Dimensional and Visual Inspection

PT&P custom designed pre-insulated pipe supports for a cryogenic pipeline at a petrochemical complex in Louisiana. They range in size from 46″ – 52″ diameter and are designed for temperatures down to -20°F. The top portion of the support is 10 lb. density and the bottom is 20 lb. high density polyurethane foam (PUF) insulation. The shoe and bearing plates were fabricated from carbon steel with a hot-dipped galvanized finish. These cold shoes include a vapor barrier comprised of a three layer lamination of polyester film and aluminum foil. Standard quality control tests were performed prior to shipment.

127 Cryogenic Insulated Pipe Supports Designed for a Chemical Plant

July 25, 2016

127 Cryogenic Insulated Pipe Supports Designed for a Chemical Plant

PT&P custom designed 127 cryogenic insulated pipe supports for a chemical plant in Texas. They are designed for pipe sizes ranging from 1″ – 24″ diameter and operating loads up to 120,517 lb. The insulation is high density polyurethane foam (PUF) ranging from 1″ to 7″ in thickness. The shoe and bearing plates were fabricated from carbon steel with a hot-dipped galvanized finish. The jacket was fabricated from aluminized steel and includes a vapor barrier. Standard Q.C. and dimensional tests were performed prior to shipment.

16" Dia. Insulated Pipe Supports Designed for a High Temperature Pipeline in Tennesse

July 27, 2015

PT&P/Pipe Shields, Inc. Manufactured Insulated Pipe Supports for a Pipeline in Tennessee

PT&P/Pipe Shields, Inc. manufactured insulated pipe supports designed for 12″-16″ diameter pipes in a high temperature application in Tennessee. They are fabricated from hot-dipped galvanized carbon steel and have 5-1/2” thick FireTemp® insulation. Standard Q.C. and dimensional tests were performed prior to an expedited shipment.

Insulated Pipe Supports Designed for Cryogenic and High Temperature Pipe Systems for an Ammonia Project

June 21, 2015

Insulated Pipe Supports Designed for Cryogenic and High Temperature Pipe Systems for an Ammonia Project

PT&P custom designed 98 insulated pipe supports for an ammonia project at a chemical plant in Louisiana. The supports were designed for cryogenic and high temperature pipe systems, with a 8″ to 22″ baseplate width and 10″ to 28″ saddle length. They were designed for pipe diameters of 6″-24″ and are comprised of polyurethane foam for cryogenic and FTM insulation for high temperatures. Standard Q.C. and dimensional tests were performed prior to shipment.

Insulated Pipe Supports Designed for 6" Dia. Cold Temperature Piping

January 11, 2014

Insulated Pipe Supports Designed for 6

These insulated pipe supports are designed for 6″ diameter cold temperature piping for a gas refinery in Texas. They are fabricated with a carbon steel shell and 5″ thick polyurethane insulation. PT&P offers various types of insulated supports utilizing insulating materials designed for piping ranging in surface temperatures from -460°F to 1,200°F.

72" Dia. Cryogenic Pipe Supports Designed for an LNG Facility

May 6, 2013

72" Dia. Cryogenic Pipe Supports Designed for an LNG Facility

Custom designed cryogenic pipe supports were fabricated for an LNG facility in Africa. The shoes range in diameter from 30″ to 72″, 45″ to 88″ in height, 42-1/2″ to 85-1/2″ in width, and 28″ to 33″ in length. The insulation is a high density polyurethane foam (PUF) ranging from 5″ to 6″ thick. The shoe and bearing plates were fabricated from carbon steel with a HDG finish. The jacket was fabricated from aluminized steel and includes a vapor barrier.

 

Insulated Pipe Supports for Temperatures as Low as -260°F for a 30" Diameter Pipe in a LNG Receiving & Regasification Plant and Refinery

January 25, 2011

Cryogenic Supports for a LNG Receiving & Regasification Plant and Refinery

These cryogenic supports (also known as cold shoes) are fabricated from 20 PCF polyurethane insulation, weigh 650 lb. each and are designed for 30″ diameter pipe. They are comprised of a carbon steel base plate and bearing plate, a vapor barrier and an aluminum jacket. The supports are designed for temperatures as low as -260°F, and measure 27″ length by 44″ height. A total of thirty-four supports were fabricated for natural gas applications, including storage and transport.

Do you see a need for cryogenic supports in your piping system? Get a quote today!

request-a-quote

Top