Dampers(type- louvers) are essentially an assembly of plates designed to control theventilation in duct work systems by keeping debris from traveling in them. We have fabricated Louver type dampers (butterfly,guillotine, radial vane, and diverter) in the shop for past projects.
Sign-up for a Live Technical Webinar…
The Compact Spring Support Webinar will cover key objectives, background, and leading industry problems related to process equipment nozzles (both rotating and non-rotating equipment). First, we will review the challenges involved in the design and analysis of piping with respect to process equipment nozzles. Secondly, we will discuss the types of chronic problems and failures related to process equipment nozzles and present (or introduce) the Compact Spring Support as a solution. During our discussion, we will explain why chronic problems with process equipment exist, describing current design practices as they relate to industry code standards and how the Compact Spring Support addresses these problems directly and effectively. And finally, we will take a quick look at the technical data and sizing program.
Piping Design and Analysis Influence on Pipe Support Selection and Design
Surveying a piping system? Need to change a current system?
This course is also great for…
• New Engineers, Management and Operations
• Field, Process, Maintenance and New Engineers
• Piping and Piping System Designers and/or Instructors
*This online course is approved for 8 hrs. P.E. Credits
Sweco Fab, Inc. designed and manufactured two 5,000 lb. air intake stacks and two 300 lb. dampers for an oil refinery in Baytown, Texas. The air intake stack is designed to keep debris from traveling to the duct. It was manufactured from A-36 carbon steel and measures at 11’x 5’x 8.’ The damper is designed to control ventilation in the ducts. This damper is manufactured from galvanized carbon steel and measures at 73.5″ I.S. x 20.5″ I.S. x 7.5″ wide.
Do you require air intake stacks or dampers like those described above? Get pricing now!
Sign-up for a Live Technical Webinar…
The Compact Spring Support Webinar will cover key objectives, background, and leading industry problems related to process equipment nozzles (both rotating and non-rotating equipment). First, we will review the challenges involved in the design and analysis of piping with respect to process equipment nozzles. Secondly, we will discuss the types of chronic problems and failures related to process equipment nozzles and present (or introduce) the Compact Spring Support as a solution. During our discussion, we will explain why chronic problems with process equipment exist, describing current design practices as they relate to industry code standards and how the Compact Spring Support addresses these problems directly and effectively. And finally, we will take a quick look at the technical data and sizing program.
Piping Design and Analysis Influence on Pipe Support Selection and Design
Surveying a piping system? Need to change a current system?
This course is also great for…
• New Engineers, Management and Operations
• Field, Process, Maintenance and New Engineers
• Piping and Piping System Designers and/or Instructors
*This online course is approved for 8 hrs. P.E. Credits
