PT&P Designed Pipe Roller Stands for a Wastewater Treatment Plant

November 7, 2016

PT&P Designed Pipe Roller Stands for a Wastewater Treatment Plant

Type: Pipe Roller Stands
Design: 1,000 lb. Load | 30″ Dia. Pipe | 18-3/4″ x 13″ x 10-3/16″ BOP
Material: Stainless Steel
Function: For support of piping that expands and contracts longitudinally and where vertical adjustment is not necessary.

Piping Technology & Products, Inc. designed pipe roller stands fabricated from stainless steel for a wastewater treatment plant. Each roller has two spring housings with eight springs in each. They are designed for an operating load of 1,000 lb. on a 30″ diameter pipeline. The rollers measure 18-3/4″ x 13″ x 10-3/16″ BOP and went through quality control inspection and tests prior to shipment.

Slide Plates & Pipe Rollers in the Fight Against Friction Webinar

May 12, 2016

This webinar is over, view the recording in our webinar archives.

Various Types of Slide PlatesDiscover the secret to a lower coefficient of friction while permitting translational motion or movement with the supporting element. Learn about the different types of slide plates and pipe rollers used for various applications. View the design, load capabilities, and installation and maintenance guidelines for both slide plates and pipe rollers. See numerous photos featuring combinations with other critical pipe supports in order to allow for movement or a low coefficient of friction. Increase your understanding of the value added services that are offered by PT&P, and rest assured that your slide plate and pipe roller needs can be taken care of by our 24×7 web-based emergency services, field service, and quick-turn around time when you need it most.

Roller Stands Designed for a Refinery in Mississippi

December 11, 2015

Roller Stands Designed for a 10" Dia. Pipeline at a Refinery in Mississippi

PT&P designed these roller stands for a refinery in Mississippi. The rollers were designed for ease of assembly to support a 10″ diameter pipeline. They are comprised of cast iron roll and sockets, steel roll rod, continuous thread rods and hex nuts. These rollers are designed to support a maximum load of 2,100 lb. and to allow axial movement of the pipeline.

Stainless Steel Roller Stands Custom Designed for a Wastewater Treatment Plant

June 8, 2015

Stainless Steel Roller Stands Custom Designed for a Wastewater Treatment Plant

PT&P designed spring loaded stainless steel roller stands for a wastewater treatment plant. The rollers were custom designed for ease of assembly to support a 30″ diameter pipeline. They include eight springs in two spring housings and are designed for 1,000 lb. load. The base plate is 18-3/4″ x 13″ and the BOP is 10-3/16″. Roller stands are used to support pipelines that expand and contract longitudinally in the axial direction and where vertical adjustment is not necessary.

What is a roller hanger?

November 2, 2010

A roller hanger is a pipe attachment which utilizes a pipe roller for axial movement and is used in a suspension hanger.

Galvanized Roller Hanger
Galvanized Roller Hanger

Roller Stands for a Company that Manufactures "Fired Heaters"

December 14, 2005
Roller Stands for a Company that Manufactures "Fired Heaters"
Roller Stands for a Company that Manufactures "Fired Heaters"

Roller Stands for a Company that Manufactures "Fired Heaters"
Load Testing Rollers

Roller stands are used to support pipelines that expand and contract longitudinally in the axial direction and where vertical adjustment is not necessary. These roller stands are made of stainless steel and designed for a 26″ pipe. They weigh 160 lbs and are capable of supporting 7,500 lbs. Load testing at 1,000F was completed for performance assurance.

Do you require roller stands like those described above? Get pricing today!

request-a-quote


Eight Polyurethane Pipe Rollers for a Gas Plant

May 20, 2005
Eight Polyurethane Pipe Rollers for a Gas Plant
Eight Polyurethane Pipe Rollers for a Gas Plant

Piping Technology & Products, Inc. designed and manufactured eight polyurethane pipe rollers for a gas plant in California. These 24 non-conductive pipe rollers are fabricated from polyurethane. They were pre-tested for an operation load of 6,100 lbs. The purpose of these polyurethane pipe rollers is to support gas piping where a non-conductive support is required.

Do you require pipe rollers in your piping system? Let us price them for you today!
request-a-quote


72” Roller Stands for a Cooling Tower

December 3, 2003
72” Roller Stands for a Cooling Tower
72” Roller Stands for a Cooling Tower

PT&P fabricated heavy-duty roller stands, 60” and 72” in diameter, to support large pipes in a cooling tower. The roller stands support loads up to 60,000 lbs. while allowing the pipe axial movement during temperature fluctuation. To reduce friction the rollers are fabricated out of machined carbon steel. The round bar and the stands are fabricated from A-36 carbon steel plate.

Do you require roller stands in your piping system? Let us price them for you today!
request-a-quote


Top