A pipe anchor support is a rigid device that completely restricts pipe movement in all three dimensions while bearing the weight, side, and thrust loads. It is designed to prevent essentially all pipe rotation and displacement at the point of application.
Cold Insulated Pipe Anchors with Axial Stops
At Piping Technology & Products, the term pre-insulated used in the context of pipe supports, refers to the feature of pipe shoes which allows a segment of the insulation to be incorporated into the support. This means that the insulation will be installed into position at the time of the support installation and remain in tact throughout the duration of the pipe support's lifespan.
Pre-Insulated Cryogenic Pipe Support
At Piping Technology & Products, the density of the polyurethane that we offer 10 lb./cubic ft., 15 lb./cubic ft. and 20 lb./cubic ft. and 32 lb./cubic ft.
Stock Polyurethane Foam
This cold shoe is manufactured from carbon steel and has 2-1/2″ thick polyurethane insulation. It is designed to support a vertical load of 2700 lb. and can withstand a temperature range from -100°F to 70°F. The cold shoe will be used in a 60″ diameter thermal energy storage tank for power generation.
Want to learn more about cold shoes? Instantly view a past cold shoe webinar!
These foam glass-PUF hybrid insulated supports are designed for a temperature range of 77°F to -300°F. They are designed for a 16″ diameter pipe and have a load capacity of 11,050 lb. The 2-1/2″ thick insulation consist of foam glass on the upper half and polyurethane (PUF) on the bottom half. The clamps, ribs and base are fabricated from A-36 carbon steel.
Want to learn more about cold supports? Watch an instant webinar on cold shoes!
PT&P fabricated hot shoes with an insulation thickness of 2 ½” and a pipe size of 20″. The supports are fabricated from carbon steel with a red oxide finish and calcium silicate insulation. They are capable of loads up to 3400 lb. and temperatures ranging from 40°F to 1200°F. PT&P completed delivery for this rush job within two weeks.
Want to learn more about hot shoes? Instantly watch a pre-insulated support webinar today!
Piping Technology & Products, Inc. designed and fabricated rotational anchor pre-insulated pipe supports for a fluid processing plant in Kuwait. The supports range in size from 24″ to 34″ in diameter and are capable of withstanding 12,500 lb. of vertical load. The bottom of the hot shoe is fabricated from carbon steel and the top from stainless steel.
These supports include stainless steel inner thrust plates that function as an anchor to prohibit the pipe from rotating within the shoe. These supports are designed for steam super heater lines and provide thermal insulation for the pipe in order to prevent heat loss and condensation.
Want to learn more about pre-insulated supports? Instantly watch a pre-insulated support webinar!
This hot shoe was fabricated from carbon steel, calcium silicate and Firetemp®. Firetemp® is the insulation that carries the load of the pipe. In addition, calcium silicate was also used because it has a lower density, making it a better insulator. This shoe is used as a pipe support and can handle temperatures of up to 1,200F. It measures at 73 in diameter with 5 insulation and weighs 2,391lbs. This hot shoe was expedited in one week per customers request.
Do you require hot shoes for your current or future job? Get pricing today!
The hot shoes were constructed using high temperature insulation made from calcium silicate, lined with a ceramic fiber blanket in a steel cradle (A36 Carbon Steel). The shoes were designed for 1500 F and a vertical load range between 25,000 lbs and 32,000 lbs, and the BOP was 10″. The overall diameter including 7″ of insulation is 49 7/8″. Belleville washers are used to hold bolt tension in pipeline with high frequency vibration.
Want to learn more about hot shoes? View a past pre-insulated webinar today!
Piping Technology & Products, Inc. designed and manufactured several variable assemblies with pre-insulated pipe clamps for a chemical company in Texas. These assemblies are constructed of galvanized carbon steel hangers and hardware with Marinite® insulation. The fabricated clamps range in size from 10″ to 30″, insulation thickness of 1″ to 8″ and with spring hanger sizes 80-180 standard, double, and triple variable spring hangers.
Do you require variable springs or pre-insulated pipe clamps? Let us price them for you today!
| Type: | Cryogenic Pipe Supports |
| Size: | Pipe Size of 1” to 36” |
| Material: | LTCS Material Tops, Stainless Steel, & Micarta® G-10 Insulation |
| Design: | -50°F |
| Testing: | PMI |
Piping Technology and Products supplied these cryogenic and axial stop cold shoes for an LNG facility in Australia. The cryogenic pipe supports were fabricated with LTCS material tops, stainless steel and Micarta® G-10 insulation blocks. They were a wide range of lengths from pipe size of 1” to 36”. The cryogenic temperatures are low as -50°F. A special paint system was used for the carbon steel components to resist rust. PMI testing was performed on the stainless parts prior to the 4-6 week shipping.
Sign-up for a Live Technical Webinar…
This Webinar will focus on the different types of constant spring supports. Learn about the special features available, in addition to the design of a constant support. View how the different cam/coil configurations produce a unique response to an applied load. Discover the step-by-step process used to size a spring for your application. Learn about the different attachments, testing, and installation and maintenance procedures. View examples of failed supports provided by our Field Service Division and learn why they failed and how to prevent it. Gain knowledge of the valuable tips used when deciding to adjust or replace a constant spring support, as well as shutdown and isolation procedures.
October 5th: Field Service: Problem Resolution Live Webinar 10:00 am OR 2:00 pm
October 12th: U.S. Bellows - Expansion Joints In-depth Webinar 10:00 am OR 2:00 pm
October 19th: Shock Control, Restraint & Support Devices Webinar 10:00 am OR 2:00 pm
Piping Design and Analysis Influence on Pipe Support Selection and Design
Surveying a piping system? Need to change a current system?
This course is also great for…
• New Engineers, Management and Operations
• Field, Process, Maintenance and New Engineers
• Piping and Piping System Designers and/or Instructors
*This online course is approved for 8 hrs. P.E. Credits
