Structural Supports with Megalug Pipe Attachments

December 13, 2006
Structural Supports with Megalug Pipe Attachments
Structural Supports with Megalug Pipe Attachments
Structural Supports with Megalug Pipe Attachments
Megalug Attachments
Structural Supports with Megalug Pipe Attachments
Megalug Pipe Attachments

Piping Technology & Products, Inc. Designed and Fabricated Structural Pipe Hangers with Megalug® Pipe Attachments.

Structural Supports with Megalug Pipe Attachments
Structural Supports with Megalug Pipe Attachments

These are carbon steel structural supports designed for 6″, 10″ and 12″ ductile iron pipe. They are hot dip galvanized to protect against corrosion and will be used in conjunction with hydraulic snubbers. The hydraulic snubbers are used to protect against axial shock loading, as well as providing vertical weight support.

Each support utilizes a Megalug pipe attachment to eliminate the need for field welding. The Megalug® attachments are designed to “bite” into the sides of the pipe providing an attachment point for the flanges on the fabricated clamp.

Structural Supports
Structural Supports

The 6″ supports are designed for a maximum vertical load of 3,770 pounds, while the 10″ and 12″ supports are designed for a maximum vertical load of 11,630 pounds. All of the supports are built for an overall height of 55-1/8″ from the upper support steel to pipe centerline.

Want to learn more about our structural supports we offer? Watch a webinar today!


access-our-webinar-archives



80ft. wide Cantilevered Canopy for an International Project

August 9, 2006
80ft. wide Cantilevered Canopy for an International Project
80ft. wide Cantilevered Canopy for an International Project

Piping Technology & Products, Inc. fabricated a Cantilevered Canopy for the entrance of an International State Department building. The Canopy was fabricated using ten 20-foot long girders. These girders were connected by sixty-three structural steel members. Together, they formed the 80-foot width of the Canopy. The wooden sheathing and architectural cladding that is supported by the canopy’s inner steel structure was installed at the construction site.

The fabricated girders and structural members combined weight exceeds 33,000 lb.

Piping Technology & Products also supplied the steel framing that supports the sheathing and cladding, roof drains and piping installed inside the canopy.

Want to learn more about the miscellaneous structures we provide? Watch a webinar today!



access-our-webinar-archives



Top