Insulated Supports (Figures 4500 – 4800)

Insulated pipe supports are designed to prevent direct heat transfer between pipes and their supports. Thus, they reduce heat loss due to conduction at each support. They serve the following purposes: Carry the load and allow necessary movement at each suppose point, provide insulation in the support area where the regular pipe insulation cannot be installed and minimize the cost of field installation by reducing installation time. The supports are not welded to the pipe and each unit is shipped completely assembled (except for the riser supports and anchor supports, both of which require some welding).

Acid Plants
Ammonia Plant
Chemical Plant
Clean Fuels

Cogeneration Plant
Cold / Cryogenc Service
Commercial
Electric Plant

Energy Facility
Ethylene Plant
Heat Recovery Steam Generation Plant
Hospital

LLDPE Chemical Plant
LNG Plant
MTBE Plant
See All

High Strength Stainless Steel Pipe Shoes

Custom Anchor Cold Shoes for a Company in Texas

Pipe Clamp Support Assembly — 8,500 lb. Load Clamp Support Assembly

PT&P Aids in the Immediate Replacement of over 160 Pipe Shoes

Fig. 6: Cylinder Pipe Guide (Spider Guide)

Spider Guides for a Heat Recovery Steam Generation Plant

Fig. 6: Cylinder Pipe Guide (Spider Guide) for a Power Plant

See More Images

Pipe Support Field Inspection, Installation & Maintenance

Pipe Support Engineering & Design

Pipe Clamp Design, Application & Installation Webinar

See More Videos

More FAQs…

Download PDF

Fig. 4500: Insulated Shoe Support for Hot Pipe (Hot Shoe)

Fig. 4500: Insulated Shoe Support for Hot Pipe (Hot Shoe)
MATERIAL: Shield and jacket – Galvanized carbon steel.
INSULATION: Asbestos free calcium silicate and/or high-density calcium silicate.
BONDING: Insulation, galvanized jacket and shield can be bonded per customer specifications.
OPTIONS: Support design can be modified for length, insulation thickness, higher load and axial movement. Slide plates are available upon request. Please specify by “-SL” after figure number.
HOW TO ORDER: Specify figure number, pipe size, description, insulation, thickness, and slide plate material, if desired.

PIPE SIZE	H (in.)	L (in.)	AXIAL MVMT. (in.)	LOAD CAPACITY (lb.)	APPROX. WEIGHT (lb.)
3	4	12	4	350	39
4	4	12	4	375	50
6	4	12	4	675	77
8	4	12	4	900	99
10	4	12	4	1100	108
12	4	12	4	1325	122
14	4	12	4	1500	127
16	4	12	4	1700	137
18	4	12	4	1875	191
20	4	12	4	2075	205
24	4	12	4	2500	232

“H” dimension given above is based on 2″ insulation thickness. Please mention in your inquiry if it is different than listed above. Contact us for your requirements other than those listed above.

Download PDF

Fig. 4600: Insulated Shoe Support for Cold Pipe (Cold Shoes)

Fig. 4600: Insulated Shoe Support for Cold Pipe (Cold Shoes)
MATERIAL: Shield and jacket – Galvanized carbon steel.
INSULATION: High density Polyurethane (PUF)
BONDING: Galvanized jacket, vapor barrier and polyurethane insulation can be bonded per customer specifications.
COATING: Inside surface of polyurethane insulation is covered with pressure sensitive tape and exposed surfaces are coated with monolar mastic.
OPTIONS: Support design can be modified for length, insulation thickness, higher load capacity, and axial movement. Slide plates are also available upon request. Please specify by “-SL” after figure number.
HOW TO ORDER: Specify figure number, pipe size, description, insulation, thickness, and slide plate material, if desired.

PIPE SIZE	H (in.)	L (in.)	AXIAL MVMT. (in.)	LOAD CAPACITY (lb.)	APPROX. WEIGHT (lb.)
3	4	12	4	320	38
4	4	12	4	610	44
6	4	12	4	900	75
8	4	12	4	1490	100
10	4	12	4	1850	108
12	4	12	4	2200	123
14	4	12	4	5900	132
16	4	12	4	6700	143
18	4	12	4	7500	197
20	4	12	4	8400	212
24	4	12	4	10100	240

Download PDF

Fig. 4700: Clamped Shoe for Insulated Cold Lines

Fig. 4700: Clamped Shoe for Insulated Cold Lines
MATERIAL: Clamps and base – stainless steel. Base plate – carbon steel.
INSULATION: Micarta® or Permali®
OPTIONS: Support design can be modified for length, insulation thickness and axial movement. Slide plates and guides are also available upon request.
HOW TO ORDER: Specify figure number, pipe size and insulation thickness. Also specify any special dimensions.

PIPE SIZE	H (in.)	L (in.)	Axial Movement (in.)	Vertical Load (lb.)	APPROX. WEIGHT (lb.)
3	6	12	4	4000	34
4	6	12	4	5000	35
6	6	12	4	6000	52
8	6	12	4	6000	60
10	6	12	4	8000	93
12	6	12	4	8000	136
14	6	12	4	8000	164
16	6	12	4	12000	183
18	8	12	4	12000	352
20	8	12	4	15000	415
24	8	12	4	15000	538

Download PDF

Fig. 4800-A: Insulated Cold Shoe with G10 (Anchor)

Fig 4800 a
SIZE RANGE: 2″ thru 54″
MATERIAL: Shoe: Same as pipe material / Bottom plate: carbon steel
INSULATION: G10
OPTIONS: Support design can be modified for length, insulation thickness and axial movement. Slide plates are provided depending on pipe movement
HOW TO ORDER: Specify figure number, pipe size, description.

PIPE SIZE	SHOE LENGTH (L)	SHOE HEIGHT (H)	AXIAL LOAD (Lbs)	LATERAL LOAD (Lbs)	COMPRESSION LOAD (Lbs)	AXIAL MOVEMENT (In)
2	12	6	7,000	2,371	20,207	4
3	12	6	7,000	2,371	20,207	4
4	12	6	7,000	2,371	20,207	4
6	12	6	7,000	2,371	20,207	4
8	12	6	11,000	10,000	21,330	4
10	12	6	11,000	10,000	21,330	4
12	12	6	11,000	11,000	50,516	4
14	12	6	11,000	11,000	50,516	4
16	12	6	11,000	11,000	50,517	4
18	12	6	11,000	11,000	50,517	4
20	12	6	11,000	11,000	50,517	4
24	18	6	11,000	11,000	60,624	4
30	18	6	44,000	44,000	132,602	4
36	24	6	45,000	45,000	176,390	4
40	24	6	45,000	46,000	251,464	4
42	24	6	45,000	46,000	251,464	4
48	24	6	45,000	46,000	269,426	4
54	24	6	45,500	46,000	287,387	4

Download PDF

Fig. 4800-G: Insulated Cold Shoe with G10 (Guides)

Fig 4800 g
SIZE RANGE: 2″ thru 54″
MATERIAL: Shoe: Same as pipe material / Bottom plate: carbon steel
INSULATION: G10
OPTIONS: Support design can be modified for length, insulation thickness and axial movement. Slide plates are provided depending on pipe movement
HOW TO ORDER: Specify figure number, pipe size, description.

PIPE SIZE	SHOE LENGTH (L)	SHOE HEIGHT (H)	AXIAL LOAD (Lbs)	LATERAL LOAD (Lbs)	COMPRESSION LOAD (Lbs)	AXIAL MOVEMENT (In)
2	12	6	7,000	2,371	20,207	4
3	12	6	7,000	2,371	20,207	4
4	12	6	7,000	2,371	20,207	4
6	12	6	7,000	2,371	20,207	4
8	12	6	11,000	10,000	21,330	4
10	12	6	11,000	10,000	21,330	4
12	12	6	11,000	11,000	50,516	4
14	12	6	11,000	11,000	50,516	4
16	12	6	11,000	11,000	50,517	4
18	12	6	11,000	11,000	50,517	4
20	12	6	11,000	11,000	50,517	4
24	18	6	11,000	11,000	60,624	4
30	18	6	44,000	44,000	132,602	4
36	24	6	45,000	45,000	176,390	4
40	24	6	45,000	46,000	251,464	4
42	24	6	45,000	46,000	251,464	4
48	24	6	45,000	46,000	269,426	4
54	24	6	45,500	46,000	287,387	4

Download PDF

Fig. 4800-S: Insulated Cold Shoe with G10 (Slides)

Fig 4800 s
SIZE RANGE: 2″ thru 54″
MATERIAL: Shoe: Same as pipe material / Bottom plate: carbon steel
INSULATION: G10
OPTIONS: Support design can be modified for length, insulation thickness and axial movement. Slide plates are provided depending on pipe movement
HOW TO ORDER: Specify figure number, pipe size, description.

PIPE SIZE	SHOE LENGTH (L)	SHOE HEIGHT (H)	AXIAL LOAD (Lbs)	LATERAL LOAD (Lbs)	COMPRESSION LOAD (Lbs)	AXIAL MOVEMENT (In)
2	12	6	7,000	2,371	20,207	4
3	12	6	7,000	2,371	20,207	4
4	12	6	7,000	2,371	20,207	4
6	12	6	7,000	2,371	20,207	4
8	12	6	11,000	10,000	21,330	4
10	12	6	11,000	10,000	21,330	4
12	12	6	11,000	11,000	50,516	4
14	12	6	11,000	11,000	50,516	4
16	12	6	11,000	11,000	50,517	4
18	12	6	11,000	11,000	50,517	4
20	12	6	11,000	11,000	50,517	4
24	18	6	11,000	11,000	60,624	4
30	18	6	44,000	44,000	132,602	4
36	24	6	45,000	45,000	176,390	4
40	24	6	45,000	46,000	251,464	4
42	24	6	45,000	46,000	251,464	4
48	24	6	45,000	46,000	269,426	4
54	24	6	45,500	46,000	287,387	4

Size Range: For use with 1/2″ through 72″, most designs. insulation thickness of 1″. 1-1/2″, 2″, 2-1/2″, 3″, 3-1/2″, 4″ and larger sizes where specified.

How to Size: Refer to “Insulation Chart” below for Sizing the Insulation Material.

Ordering: Specify figure number, pipe size, insulation thickness, and insulating material

Example:
Fig. 4700-4-3-B
• 4700 = Type of Insulated Shoe (cold)
• 4 = Nominal Pipe Size
• 3= Insulation Thickness
• B = Insulation Material (Micarta)

NOMINAL INSULATION THICKNESS (in.)	INSULATION O.D. (in.)	APPROX. INSULATION THICKNESS (in.)
Pipe size: 1/2" (O.840 O.D.)
1	2 7/8	1
1 1/2	4	1 9/16
2	5	2 1/16
2 1/2	6 5/8	2 7/8
3	7 5/8	3 3/8
3 1/2	8 5/8	3 7/8
4	9 5/8	4 3/8
Pipe size: 3/4" (1.050 O.D.)
1	2 7/8	7/8
1 1/2	4	1 7/16
2	5	1 15/16
2 1/2	6 5/8	2 3/4
3	7 5/8	3 1/4
3 1/2	8 5/8	3 3/4
4	9 5/8	4 1/4
Pipe size: 1" (1.315 O.D.)
1	3 1/2	1 1/16
1 1/2	4 1/2	1 9/16
2	5 9/16	2 1/8
2 1/2	6 5/8	2 5/8
3	7 5/8	3 1/8
3 1/2	8 5/8	3 5/8
4	9 5/8	4 1/8
Pipe size: 1 1/4" (1.66 O.D.)
1	3 1/2	15/16
1 1/2	5	1 11/16
2	5 9/16	1 15/16
2 1/2	6 5/8	2 1/2
3	7 5/8	3
3 1/2	8 5/8	3 1/2
4	9 5/8	4
Pipe size: 1 1/2" (1.90 O.D.)
1	4	1 1/16
1 1/2	5	1 9/16
2	6 5/8	2 3/8
2 1/2	7 5/8	2 7/8
3	8 5/8	3 3/8
3 1/2	9 5/8	3 7/8
4	10 3/4	4 7/16
Pipe size: 2" (2 3/8" O.D.)
1	4 1/2	1 1/16
1 1/2	5 9/16	1 9/16
2	6 5/8	2 1/8
2 1/2	7 5/8	2 5/8
3	8 5/8	3 1/8
3 1/2	9 5/8	3 5/8
4	10 3/4	4 3/16
Pipe size: 2 1/2" (2 7/8" O.D.)
1	5	1 1/16
1 1/2	6 5/8	1 7/8
2	7 5/8	2 3/8
2 1/2	8 5/8	2 7/8
3	9 5/8	3 3/8
3 1/2	10 3/4	3 15/16
4	11 3/4	4 7/16
Pipe size: 3" (3 1/2" O.D.)
1	5 9/16	1
1 1/2	6 5/8	1 9/16
2	7 5/8	2 1/16
2 1/2	8 5/8	2 9/16
3	9 5/8	3 1/16
3 1/2	10 3/4	3 5/8
4	11 3/4	4 1/8
Pipe size: 3 1/2" (4" O.D.)
1	6 5/8	1 5/16
1 1/2	7 5/8	1 13/16
2	8 5/8	2 5/16
2 1/2	9 5/8	2 13/16
3	10 3/4	3 3/8
3 1/2	11 3/4	3 7/8
4	12 3/4	4 3/8
Pipe size: 4" (4 1/2" O.D.)
1	6 5/8	1 1/16
1 1/2	7 5/8	1 9/16
2	8 5/8	2 1/16
2 1/2	9 5/8	2 9/16
3	10 3/4	3 1/8
3 1/2	11 3/4	3 5/8
4	12 3/4	4 1/8
Pipe size: 4 1/2" (5" O.D.)
1	7 5/8	1 5/16
1 1/2	8 5/8	1 13/16
2	9 5/8	2 5/16
2 1/2	10 3/4	2 7/8
3	11 3/4	3 3/8
3 1/2	12 3/4	3 7/8
4	14	4 1/2
Pipe size: 5" (5 9/16" O.D.)
1	7 5/8	1
1 1/2	8 5/8	1 1/2
2	9 5/8	2
2 1/2	10 3/4	2 9/16
3	11 3/4	3 1/16
3 1/2	12 3/4	3 9/16
4	14	4 3/16
Pipe size: 6" (6 5/8" O.D.)
1	8 5/8	15/16
1 1/2	9 5/8	1 7/16
2	10 3/4	2
2 1/2	11 3/4	2 1/2
3	12 3/4	3
3 1/2	14	3 5/8
4	15	4 1/8
Pipe size: 7" (7 5/8" O.D.)
1	9 5/8	1
1 1/2	10 3/4	1 1/2
2	11 3/4	2
2 1/2	12 3/4	2 1/2
3	14	3 1/8
3 1/2	15	3 5/8
4	16	4 1/8
Pipe size: 8" (8 5/8" O.D.)
1	10 3/4	1 1/16
1 1/2	11 3/4	1 1/2
2	12 3/4	2
2 1/2	14	2 5/8
3	15	3 1/8
3 1/2	16	3 5/8
4	17	4 1/8
Pipe size: 9" (9 5/8" O.D.)
1	11 3/4	1 1/16
1 1/2	12 3/4	1 1/2
2	14	2
2 1/2	15	2 5/8
3	16	3 1/8
3 1/2	17	3 5/8
4	18	4 1/8
Pipe size: 10" (10 3/4" O.D.)
1	12 3/4	1
1 1/2	14	1 9/16
2	15	2 1/16
2 1/2	16	2 9/16
3	17	3 1/16
3 1/2	18	3 9/16
4	19	4 1/16
Pipe size: 11" (11 3/4" O.D.)
1	14	1 1/8
1 1/2	15	1 9/16
2	16	2 1/16
2 1/2	17	2 9/16
3	18	3 1/16
3 1/2	19	3 9/16
4	20	4 1/16
Pipe size: 12" (12 3/4" O.D.)
1	15	1 1/8
1 1/2	16	1 9/16
2	17	2 1/16
2 1/2	18	2 9/16
3	19	3 1/16
3 1/2	20	3 9/16
4	21	4 1/16
Pipe size: 14" (14" O.D.)
1	16	2
1 1/2	17	1 7/16
2	18	1 15/16
2 1/2	19	2 7/16
3	20	2 15/16
3 1/2	21	3 7/16
4	22	3 15/16
Large sizes, insulation O.D. are in 1" increments. Insulation thicknesses through 36" same as nominal. All dimensions rounded to the nearest 1/16".

hbspt.forms.create({
portalId: “88145”,
formId: “387a2f0a-000b-4fec-ace9-674cd4cf472e”
});

Cookie	Duration	Description
cookielawinfo-checkbox-analytics	11 months	This cookie is set by GDPR Cookie Consent plugin. The cookie is used to store the user consent for the cookies in the category "Analytics".
cookielawinfo-checkbox-functional	11 months	The cookie is set by GDPR cookie consent to record the user consent for the cookies in the category "Functional".
cookielawinfo-checkbox-necessary	11 months	This cookie is set by GDPR Cookie Consent plugin. The cookies is used to store the user consent for the cookies in the category "Necessary".
cookielawinfo-checkbox-others	11 months	This cookie is set by GDPR Cookie Consent plugin. The cookie is used to store the user consent for the cookies in the category "Other.
cookielawinfo-checkbox-performance	11 months	This cookie is set by GDPR Cookie Consent plugin. The cookie is used to store the user consent for the cookies in the category "Performance".
viewed_cookie_policy	11 months	The cookie is set by the GDPR Cookie Consent plugin and is used to store whether or not user has consented to the use of cookies. It does not store any personal data.

Types & Sizes

Technical Information

INSTALLATION & MAINTENANCE

Request a Quote

Pipe Support Field Inspection, Installation & Maintenance

Pipe Support Engineering & Design

Pipe Clamp Design, Application & Installation Webinar

General Dimensions & Specifications

Fig. 4500: Insulated Shoe Support for Hot Pipe (Hot Shoe)

Fig. 4600: Insulated Shoe Support for Cold Pipe (Cold Shoes)

Fig. 4700: Clamped Shoe for Insulated Cold Lines

Fig. 4800-A: Insulated Cold Shoe with G10 (Anchor)

Fig. 4800-G: Insulated Cold Shoe with G10 (Guides)

Fig. 4800-S: Insulated Cold Shoe with G10 (Slides)

Pipe size: 1/2" (O.840 O.D.)

Pipe size: 3/4" (1.050 O.D.)

Pipe size: 1" (1.315 O.D.)

Pipe size: 1 1/4" (1.66 O.D.)

Pipe size: 1 1/2" (1.90 O.D.)

Pipe size: 2" (2 3/8" O.D.)

Pipe size: 2 1/2" (2 7/8" O.D.)

Pipe size: 3" (3 1/2" O.D.)

Pipe size: 3 1/2" (4" O.D.)

Pipe size: 4" (4 1/2" O.D.)

Pipe size: 4 1/2" (5" O.D.)

Pipe size: 5" (5 9/16" O.D.)

Pipe size: 6" (6 5/8" O.D.)

Pipe size: 7" (7 5/8" O.D.)

Pipe size: 8" (8 5/8" O.D.)

Pipe size: 9" (9 5/8" O.D.)

Pipe size: 10" (10 3/4" O.D.)

Pipe size: 11" (11 3/4" O.D.)

Pipe size: 12" (12 3/4" O.D.)

Pipe size: 14" (14" O.D.)