Fig. 2110: Sway Strut with 4″ of Adjustment
NOTE: Rods should be visible in the sight holes at each end of the strut to assure proper thread engagement. Special lengths are available upon request.
* Load must not be applied outside a 10° included angle to the pipe clamp axis
ORDERING: Specify figure number, size, type, description, nominal pipe size or special O.D. and C-to-C dimension.
| SIZE | LOAD lbs. | ROD END | EXT. PIECE PIPE SIZE | A | C-C | W Min. | F | D | D1 | N | R | S | T | |
| Min. | Max. |
|||||||||||||
| A | 650 | 3/4 | 1″ SCH.80 | 1 1/2 | 18 3/4 | 60 | 9 1/2 | 4 5/8 | 1 5/8 | 1 3/4 | 1/4 | 1 | 3/4 | 0.497 0.495 |
| B | 1500 | 1 | 1 1/2″ SCH.40 | 2 3/8 | 20 1/2 | 108 | 10 | 5 1/4 | 2 1/4 | 2 7/8 | 3/8 | 1 1/8 | 1 1/8 | 0.747 0.745 |
| C | 4500 | 1 | 2″ SCH.40 | 2 3/4 | 20 1/2 | 120 | 10 | 5 1/4 | 2 1/2 | 3 3/8 | 1/2 | 1 1/2 | 1 1/8 | 0.745 0.745 |
| 1 | 8000 | 1 1/4 | 2″ SCH.160 | 3 3/4 | 24 | 120 | 10 1/2 | 6 3/4 | 3 | 4 3/8 | 3/4 | 1 3/4 | 1 3/8 | 0.997 0.995 |
| 2 | 11630 | 1 1/2 | 2 1/2″ SCH.160 | 3 | 25 | 120 | 11 | 7 | 3 1/2 | 5 3/8 | 3/4 | 1 3/4 | 1 1/2 | 0.997 0.995 |
| 3 | 15700 | 1 3/4 | 2 1/2″ SCH.160 | 5 5/16 | 25 1/2 | 120 | 11 1/2 | 7 | 5 7/16 | 4 11/16 | 1 | 2 | 1 13/16 | 1.248 1.246 |
| 4 | 20700 | 2 | 3″ SCH.160 | 5 5/16 | 29 1/2 | 120 | 12 | 8 3/4 | 5 7/16 | 4 11/16 | 1 | 2 1/2 | 1 13/16 | 1.248 1.246 |
| 5 | 27200 | 2 1/4 | 3″ SCH.160 | 6 | 32 1/2 | 120 | 13 | 9 3/4 | 5 9/16 | 6 | 1 1/4 | 2 1/2 | 2 1/8 | 1.498 1.496 |
| 6 | 33500 | 2 1/2 | 4″ SCH.160 | 6 3/4 | 35 1/2 | 120 | 13 | 11 1/4 | 6 1/8 | 6 9/16 | 1 3/4 | 3 | 2 3/16 | 1.748 1.746 |
| 7 | 68200 | 3 | 4″ SCH.160 | 6 | 38 1/2 | 120 | 14 | 12 1/4 | 7 1/8 | 5 3/4 | 2 | 3 1/2 | 2 3/8 | 1.998 1.996 |
| 8 | 120000 | 4 | 6" SCH. 160 | 7 1/4 | 41 1/2 | 120 | 16 | 12 3/4 | 14 | 8 3/4 | 2 1/4 | 4 3/4 | 2 13/16 | 2.498 2.496 |