Fig400
Fig. 400 Light Duty Variable Spring Hnagers

SERVICES: Recommended for light loads where vertical movement does not exceed 1¼ inches.

MATERIALS: Carbon steel spring coil and casing.

APPROVALS: Complies with Federal Specification WW-H-171D (Type 49) and Manufacturers Standardization Society SP-69 (Type 48).

INSTALLATION: Designed for attachment to its supporting member by screwing a rod into the top cap of the hanger the full depth of the cap.

APPLICATION: Normally done by approximate methods taking into account weight of pipe, covering, contents, and major fittings.

SELECTION: Normally done by approximate methods taking into account weight of pipe, covering, contents, and major fittings.

ORDERING: The Light Duty Spring Hanger is used for the support of miscellaneous field run piping systems subject to slight (up to ¼”) vertical displacement. It is designed for the incorporation in rod hangers with a load coupling provided for spring loading. Amount of spring loading can be approximated by relating “B” dimension with spring deflection.

SPRING SIZE NO.ABCDE
(ROD TAKE OUT)
FMAXIMUM DEFLECTION MAX LOAD
lb.
SPRING
DEFLECTION
lb. per in.
WEIGHT
lb. per 100
MIN. MAX.
13/84  1/26  1/24  1/83  3/42  3/41  5/825226160
23/84  1/26  1/44  1/83  3/43  1/81  5/81  3/411566238
31/25  7/87  3/45  1/252  3/43  1/21  7/816387287
41/25  7/87  5/85  1/253  1/43  1/21  3/4266152350
55/86  3/48  3/46  3/85  3/44  1/84  1/22400200680
63/48  3/810  7/887  3/84  5/84  1/22  1/2600240982
Top