Instrument Supports – Welded and Adjustable Components

PT&P offers a complete line of adjustable instrument support components which, when combined, will create various configurations to your exact requirements or individual needs. We also provide welded instrument supports fabricated according to your specifications.

Welded Instrument Stand
Welded Instrument Support / Stand

Adjustable Instrument Stand
Adjustable Instrument Support / Stand

ADJUSTABLE INSTRUMENT SUPPORTS COMPONENTS

Primary support components are available in various mount styles, including floor mounts, wall mounts, u-bolt mounts, and cable mounts. These primary mounts can be used independently or together with secondary components to construct various packages for individual needs.

Ptp-Is-600
PTP-IS-600
Primary component has a 2” pipe extension 54” long, designed for grade mounting of  instrument assemblies, comes with slotted hole in base.

Ptp-Is-610
PTP-IS-610
Primary component has a 2” square extension
16” long, designed for mounting on vertical or
horizontal lines.

Ptp-Is-620
PTP-IS-620
Primary component has a 2” pipe, at a right angle with a vertical leg, designed for mounting on vertical lines.

Ptp-Is-630
PTP-IS-630
Primary component has a 2” pipe, at a right angle with a vertical leg, designed for mounting on horizontal lines.

Ptp-Is-640
PTP-IS-640
Female adaptor with two 2” extension 2” long, provides female connection to 2” pipe components, used for constructing multiple instrument support systems.

Ptp-Is-650
PTP-IS-650
Adaptor with 2” pipe extension 8” long.

Ptp-Is-660
PTP-IS-660
2” square extension component, 16” long, with 2” u-bolt mount, for constructing various instrument support configurations.

Ptp-Is-670
PTP-IS-670
2” square component, 24” long designed for use in constructing multiple support mounts and other applicable configurations as required.

Ptp-Is-680
PTP-IS-680
Secondary component, with 2” u-bolt mount,
provides auxiliary equipment mount and/or flag for identification.

Ptp-Is-690
PTP-IS-690
Primary component, 2” square extension 16” long, designed for mounting on walls and columns.

Note: The extension lengths shown on primary components are standard, other lengths can be furnished on request.

WELDED INSTRUMENT SUPPORTS

Welded instrument supports may be fabricated in any desired configuration according to the customer’s individual requirements and design specifications.

Examples of various welded instrument support configurations:

Welded Instrument Support Configuration
Welded Instrument Support Configuration (Diagram A)

Welded Instrument Support Configuration
Welded Instrument Support Configuration (Diagram B)

Welded Instrument Support Configuration
Welded Instrument Support Configuration (Diagram 2A)

Welded Instrument Support Configuration
Welded Instrument Support Configuration (Diagram 2B)

Instrument Supports Selection Chart
Cable Mounts
U-Bolt Mounts
Wall Mounts
Floor Mounts
Secondary Supports
Attachment:
Attached to instrument by cable.
Attached to piping instrumentation.
Welded or bolted to support.
Welded or bolted to support.
Attached to instrument; welded or clamped on stand.
Function:
Support and hold instrument at fixed location.
Hold instrument during plant operation.
Support instrumentation during operations.
Support instrumentation during operations.
Used in combination with primary supports to support instrumentation.
Location:
Where instrument is welded to structure
Bolted into concrete or welded to structure.
Bolted to walls and other vertical surfaces.
Bolted on the floor or in the ground.
Attached to primary instrument stands, usually floor or wall mounts.
Top