For more than 40 years Pipe Shields Inc. and PT&P have reached throughout world markets to design and develop for power, petrochemical, chemical, and commercial industries. The accomplishments of our high-quality products are a direct result of years of research and engineering to create cost-efficient products. Pipe Shields insulated supports incorporate materials strong enough to carry the load while insulating the pipe at the same time. These supports were designed because fiberglass and foam glass materials were not strong enough to carry the load at the point of support without crushing.
Pipe Shields developed a variety of insulated pipe supports for a number of different industries designed specifically to carry the load, limit the amount of welding required, and prevent metal to metal contact.
Commercial and Light Load Applications (A Models)
Models A group are widely used in commercial applications and for smaller loads and movements, like chilled and heated water systems. That makes this model group popular among mechanical contractors.
- Commercial and Light Industrial Pre-Insulated Pipe Supports (A1000 thru A9000)
Heavy Industrial Applications (B and C Models)
Model – B group was built to support larger loads (vertical and lateral) and movements. Some models support the pipe from below. Commonly used in heavy industrial and large HVAC distribution system
- Base Mounted Pre-Insulated Pipe Supports (B1000 thru B8300)
Model – C group was built to support larger vertical loads while limited movement in the lateral and axial directions. These are commonly called Pipe Anchors.
- Pipe Anchors (C1000 thru C4300)
Pipe Riser Clamps Applications (D, E and G)
- Hanger Type Pre-Insulated Pipe Supports (D1000 thru D6300)
- Insulated Pipe Riser Clamps (E1000 thru E2300)
- Pipe Clamps, Pipe Guide Straps, Pipe Guide U-Bolts (G1000 thru G3000)
More About Pipe Shields Pre-Insulated Pipe SupportsView Product Page