PT&P designed cryogenic trunnions with 2″ thick G-10 block insulation for an LNG facility in Australia. The trunnions are fabricated from 10″, 12″ and 24″ diameter pipe. The upper sections are fabricated from stainless steel pipe and plate while the lower sections are carbon steel. These insulated supports are designed for temperatures down to -300°F and operating loads of 4,990 lb.
Sign-up for a Live Technical Webinar…
This Webinar will focus on the different types of variable spring supports and big ton variable spring supports. Learn about the special features available, in addition to the design of a variable support. View how the different coil configurations produce a unique response to an applied load and see how a spring assembly is loaded. Discover the basic steps in selecting a hanger design and the step-by-step process used to size a spring for your application. Learn about the different attachments, testing, and installation and maintenance procedures. View examples of failed supports provided by our Field Service Division and learn why they failed and how to prevent it. Gain knowledge of the valuable tips used when deciding to replace or re-calibrate a variable spring support, as well as adjustments, shutdown, and isolation procedures.
January 9th: U.S. Bellows - Expansion Joints In-depth Webinar 10:00 am OR 2:00 pm
January 16th: Pipe Clamp Design, Application & Installation Webinar 10:00 am OR 2:00 pm
Piping Design and Analysis Influence on Pipe Support Selection and Design
Surveying a piping system? Need to change a current system?
This course is also great for…
• New Engineers, Management and Operations
• Field, Process, Maintenance and New Engineers
• Piping and Piping System Designers and/or Instructors
*This online course is approved for 8 hrs. P.E. Credits
