Hold-Down Clamps for a Waste Disposal Facility

September 4, 2021

Hold-Down Pipe Clamps for a 20" Pipeline at a Waste Disposal Facility

These hold-down pipe clamp assemblies are specially fabricated and include wedges with 25% glass-filled PTFE to absorb vibration and also serve as a buffer between the steel pipe and pipe support. Vibration can occur in Power, Solar, Biofuels, and Chemical plants because of flow-induced and/or acoustic-induced vibration due to the flow of fluids or gas/steam through the piping system. Similarly, vibration can occur in pipelines near rotating equipment such as reciprocating pumps and compressors resulting in pulsations or mechanical forces that can occur in both onshore or offshore production facilities. Vibration can be strong enough to cause premature failure or cracks resulting in unplanned shutdowns. These units shown in the photograph are custom-designed for pipe sizes up to 20″ in diameter and temperatures up to 200°F and can be adjusted to accommodate a range of heights for the T.O.S to the B.O.P. They are 21″ wide x 26″ long x 23″ high and are proven to greatly reduce vibration to acceptable levels. These hold-down pipe clamps are fabricated utilizing A 36 carbon steel plate and A 307 Gr. All-threaded rods. All components were hot-dipped galvanized and a quality control inspection was performed before shipment.

Read More

Pipe Supports are Now Available on Amazon!

July 23, 2021

Need a standard product quickly? Or know what you need and don’t need a quote? Pick it up on Amazon and skip the communication…

*If you need assistance, we are always available 24×7 via our emergency service or just send an email to info@pipingtech.com. You can also chat with us during business hours via the chat button on the lower-left of the screen.

 

Ptp fig30 forgedcsturnbuckle
Fig. 30 Forged Carbon Steel Turnbuckle
Ptp fig60 heavy 2 bolt pipe clamp
Fig. 60 Heavy Two-Bolt Pipe Clamp
Ptp fig70 light 3 bolt pipe clamp
Fig. 70 Light Three-Bolt Pipe Clamp
Ptp fig80 heavy 3 bolt pipe clamp
Fig. 80 Heavy Three-Bolt Pipe Clamp
Ptp fig90 riser clamp
Fig. 90 Riser Clamp
Ptp fig100 long tangent u bolt
Fig. 100 Long Tangent U-Bolt
Read More

Clamped Pipe Shoes Custom-Designed for an Offshore Vessel Project

June 29, 2021

Clamped Pipe Shoes Custom-Designed for an Offshore Vessel Project

Special clamped pipe shoes with isolators were supplied for an offshore vessel project. Offshore renewable energy companies are exploring the viability of developing an offshore charging facility for electrified vessels as well as using ammonia-powered or hydrogen-powered fuel cells to power marine vessels. As the world’s only major manufacturer of Expansion Joints and Engineered Pipe Supports, we are uniquely positioned to service a wide range of piping needs. A total of 210 pipe shoes were fabricated from carbon steel for pipe sizes ranging in size from 1″ to 24″ diameter. They are supplied with a hot-dipped galvanized finish for corrosion resistance and range in length from 8″ to 16″ with 4″ from the BOP. These pipe shoes include a dampening isolator in between the pipe and the shoe to reduce vibration and noise. A total of 1,485 supports were supplied for this order. At Piping Technology and Products, we supply products to facilities that are helping to reduce carbon emissions and reduce dependence on fossil fuels.

Read More

Hold-Down Pipe Clamps for a Steam Methane Reformer (SMR) Supplying High-purity Hydrogen

September 23, 2020

Hold-Down Pipe Clamps Designed to Limit Vibration Caused by Rotating Equipment and Avoid Damage to the Surrounding Piping System

PT&P has extensive experience involving the custom design and fabrication of hold-down pipe clamps for piping systems and skid mounted units for the power, chemical, and refineries industries throughout the world. These hold-downs are custom designed to limit vibration caused by rotating equipment and avoid damage to the surrounding piping system. They are fabricated from carbon steel with a hot-dipped galvanized coating and include PTFE slide plates to reduce the friction between the pipe and clamp, combined with fabric pads to reduce vibration dampening. The hold-downs are designed for pipelines ranging in 2” to 16” diameter. They range from 3″ wide x 9-1/8″ long to 8″ wide x 25-3/4″ long, and designed for an operating temperature of 200°F. We performed a Q.C. visual inspection prior to shipment. PT&P can custom design and fabricate hold-downs for any pipe size application. In addition to hold-downs, PT&P also offers other types of vibration control devices to accommodate different pipe orientations and locations.

Read More

Hold-Down Pipe Clamps Designed for a 36″ Diameter Natural Gas Pipeline

April 8, 2019

Hold-Down Pipe Clamps Designed for a 36" Diameter Natural Gas Pipeline

Type: HD-2 Hold-Down Pipe Clamps
HD Size: 36″ Dia. x 12″ W x 8-7/16″ H
Wedge Size: 23-3/16″ L x 6″ W
Material: Carbon Steel | PTFE
Testing: Standard Q.C. Tests

PT&P designed 50 HD-2 hold-down pipe clamps with wedges for a natural gas pipeline in Texas. They were fabricated from carbon steel and include PTFE slide plates. The hold-downs are designed for a 36″ pipeline, and are 12″ wide by 8-7/16″ tall. The wedges are 23-3/16″ long by 6″ wide. They are designed for an operating temperature on 400°F, and have an adjustable height. Standard quality control test were performed prior to shipment.

Read More

Hold-Down Pipe Clamps with Slide Plates for LNG Service

October 19, 2018

HD-2 Hold-Down Pipe Clamps with PTFE Slide Plates Designed for an LNG Plant in Australia

Type: Hold-Down Pipe Clamps
Size: 8″ Dia. Pipe
Material: Carbon Steel | HDG
Design: Up to 400°F Temperatures

PT&P designed and manufactured standard HD-2 hold-down pipe clamps for an LNG plant in Australia. They are fabricated from hot-dipped galvanized carbon steel and include PTFE slide plates. The hold-downs are designed for 8″ diameter pipe and an operating temperature up to 400°F. The HD-2 is a restraint type hold down which allows axial movement while restraining lateral movement.

Read More

110 Custom Pipe Clamps for a Construction Company

April 30, 2018

110 Custom Designed Pipe Clamps for a Construction Company in Ohio

Type: Pipe Clamps
Size: 12″ wide | 42″ Dia. pipe
Material: A36 carbon steel with PVC pad
Testing: Standard Q.C. Inspections

Piping Technology and Products, Inc. custom designed a total of 110 pipe clamps for a construction company in Ohio. The pipe clamps are fabricated from A36 carbon steel with PVC pad bonded to the clamp’s inside radius. The pipe clamps have a physical size of 12” wide, for a 42” diameter pipe. Standard QC inspections were performed with a turn-around time of 8 weeks.

Read More

Custom Designed Bolt Cradle Supports for a Chemical Plant in Texas

March 20, 2017

Custom Designed Bolt Cradle Supports for a Chemical Plant in Texas

Type: Custom Bolt Cradle Pipe Supports
Size: 24″ to 36″ Diameter Range
Material: Hot-dipped Galvanized Carbon Steel | Gasket Sealing Material
Testing: Dimensional and Visual Inspection

These supports are custom designed similar to a PTP Fig.900 bolt cradle support. They are fabricated from hot-dipped galvanized carbon steel and were designed for pipe sizes ranging from 24″ to 36″ in diameter. The assemblies include a gasket sealing material that will be installed between the pipe shoe and pipe. The pipe supports underwent dimensional and visual inspection, and stainless steel tags were riveted to the shoes prior to shipping to a chemical plant in Texas.

Read More

Heavy Duty Pipe Saddles Designed for an Ethane Cracker

October 11, 2016

Heavy Duty Pipe Saddles Designed for an Ethane Cracker

Type: Heavy Duty Pipe Saddles
Design: 60″ Dia. | 23-5/8″ Length | 5-18″ from BOP
Material: Carbon Steel with a HDG Finish
Testing: Visual | Sample Pipe | Dimensional

Piping Technology & Products, Inc. designed and manufactured these heavy duty pipe saddles for the Ethylene Plant Project in Texas. The saddles are fabricated from A36 carbon steel with a hot-dipped galvanized finish and designed to support pipes up to 60″ in diameter. They measure 23-5/8″ in length and 5-1/8″ from BOP. Standard Q.C., visual inspection with a sample pipe and dimensional tests were performed prior to shipment.

Read More

36” Dia. Cryogenic Pipe Saddles Designed for an LNG Facility

October 23, 2015

36” Dia. Cryogenic Pipe Saddles Designed for a LNG Facility

36” Dia. Cryogenic Pipe Saddles Designed for an LNG Facility

PT&P custom-designed pipe saddles with micarta base insulation for an LNG facility in Australia. The saddles were fabricated from 304L stainless steel plates with thickness ranging from 1/8” to 3/8”. The micarta blocks range in thickness from ¼”-3”. The saddles were designed to support pipes up to 36” in diameter at an operating temperature of -300°F. Standard Q.C. and dimensional tests were performed prior to shipment.

Read More
Top