Bellmouth Reducers & Custom Pipe Spools Designed for an Ammonia Plant

August 26, 2019

 

Bellmouth Reducers & Custom Pipe Spools Designed for an Ammonia Plant

Type: Bellmouth Reducers, Ring Flanges, Pipe Spool Elbows
Size: 36” NPS | Opened to 48″ NPS
Material: Carbon Steel  | 304 Stainless Steel
Design: 150°F | 150 PSI Operating Pressure

PT&P designed and manufactured bellmouth reducers, ring flanges and custom pipe spool elbows for an Ammonia Plant in Texas. Bellmouth reducers are a single piece component used to transition a large outside diameter into a smaller outside diameter piping. These reducers are used in the cooling process; the shape allows for drawing in maximum amounts of air while preventing loss. The bellmouths are fabricated from carbon steel and 304 stainless steel. They are designed for operating temperatures of 150°F with an operating pressure of 150 PSI. Dimensions are 36” NPS opened to 48” bellmouth. Tests that were performed are spot x-ray, visual and dimensional, PMI-alloys and stainless steel.

Custom Designed Pipe Spools for a Plant in Texas

June 24, 2019

Custom Designed Pipe Spools for a Plant in Texas

Type: Pipe Spools
Size: A36 for flanges and plates, A 106 for pipe, and for stud/nuts A193 B7
Material: Carbon Steel
Testing: Visual & Q.C. Tests

PT&P custom designed these Pipe Spools for a plant in Texas. pipe spools are relatively short assembly, consisting of a pre-determined length of pipe welded to a specified fitting (tee, elbow or reducer) or valve (gate or ball), with flanges typically welded at each end of the pipe. The materials used are carbon steel A36 for flanges and plates, A 106 for pipe, and for stud/nuts A193 B7. This order contained 2 pipe spools, ring retainer, pad eyes, & mount supports. Operating loads were 2200 lb. with standard shipping.

What is a Pipe Spool?

May 16, 2014

Pipe spool is a section of pipe that comes in pre-fabricated lengths from the pipe fabricator.

Top