Sway Strut and Pipe Clamp Assemblies Designed for an Energy Combustibles and Lubricants Facility

November 18, 2016

Sway Struts with Pipe Clamps for Energy Combustibles and Lubricants Facility in Argentina

Type: Sway Strut and Pipe Clamp Assemblies
Design: 4,500 lbs load
Material: A-36 Carbon Steel
Function: Let the pipe sway within a certain radius

Piping Technology & Products designed these Fig.2110F sway struts and pipe clamp assemblies for an energy combustibles and lubricants facility in Argentina. The sway struts are 60″ in length with clamp sizes of 16″ and 12″ diameters. All components were fabricated from A-36 carbon steel. They are designed for an operating load of 4,500 lb. The sway struts are designed to let the pipe sway within a certain radius.

Custom Sway Strut and Pipe Clamp Assemblies for an LNG Plant in Australia

January 22, 2016

Custom Sway Strut and Pipe Clamp Assemblies for an LNG Plant in Australia

PT&P fabricated and designed 52 of these custom sway strut assemblies for a liquid natural gas plant in Australia. These are manufactured from carbon steel with 304 stainless steel pins. The pipe sizes range from 2”-72” diameter, with a total length ranging from 27” to 137”. The sway struts are fabricated to restrain either tensile or compressive force in one direction while providing for movement due to thermal expansion or contraction in another direction. These sway struts have an operating temperature of 650°F and are designed for operating loads ranging of 650 lb. to 120,000 lb.

Special Sway Struts Designed for an LNG Plant in Australia

January 11, 2016

Special Sway Struts Designed for an LNG Plant in Australia

PT&P custom designed and fabricated 67 mini sway strut assemblies for a liquid natural gas plant in Australia. The sway struts are fabricated from galvanized carbon steel with 304 stainless steel pins. They are 14-7/16” long and capable of a 62,200 lb. load with an operating temperature of 650°F. The sway struts are fabricated to restrain either tensile or compressive force in one direction while providing for movement due to thermal expansion or contraction in another direction.

Sway Struts Custom Designed for a Chemical Plant in Texas

July 13, 2015

Custom Designed Sway Struts for a Chemical Plant in Texas

PT&P custom designed sway struts for a chemical plant located in Texas. The sway struts and rod hangers are both fabricated from carbon steel. The overall length of the support assemblies’ range from 31″ to 83″ and are capable of supporting loads up to 1,750 lb., with an operating temperature of 1100°F and 1 1/2″ of vertical movement. The sway struts are designed to restrain movement in one direction while providing movement due to thermal expansion or contraction in another direction.

26'-9" Custom Designed Sway Struts with Ball Joints

August 13, 2012

26'-9" Custom Designed Sway Struts with Ball Joints

These 26′-9″ long custom designed sway struts with ball joints were supplied for a power generating facility. There were 4 total assemblies that included 4″ diameter schedule 80 pipe with one ball joint and one extension piece on each end measuring 3″ in diameter and 6″ long. The sway struts, designed to support a load of 29,000 lb., will be used in the facility to allow movement between two structures along a parallel plane.

Large Custom Sway Struts Designed for a Liquid Filters Manufacturer

October 31, 2011

Custom Sway Strut Assemblies

These custom fig. 2110, size 8 sway struts are for a liquid filters manufacturer located in Mississippi. Both sway struts have a 128,000 lb. load capacity and are fabricated from carbon steel with a hot-dipped galvanized finish. The sway struts measure 68-5/8″ long and have a 4″ diameter rod size. A load test was performed prior to an expedited shipping schedule of 1-1/2 weeks.

Do you require custom supports that are not found in our catalog? No problem! Get pricing today.

request-a-quote


Sway Strut Assemblies with Custom Designed 3-Bolt Pipe Clamps

May 13, 2009

 

Sway Strut Assemblies with Custom Designed 3-Bolt Pipe Clamps
Sway Strut Assemblies with Custom Designed 3-Bolt Pipe Clamps
These sway strut assemblies are designed in conjunction with custom three-bolt clamps to prevent movement on the pipeline. The sway struts range in length from 25″ to 70″ from pin to pin. The operating load ranges between 8,000 lb. to 15,000 lb. The clamps are designed for pipe sizes ranging from 8″ to 24″. The sway strut assemblies are fabricated entirely from carbon steel with a hot-dipped galvanize finish. The completed assemblies also include a custom 2-coat paint system that was applied over the galvanize finish before being shipped to an LNG plant overseas.

Do you see a need for sway struts in your piping system? Get pricing today!
request-a-quote

Ball-Joint Sway Strut Assemblies (20,000 lb. load, 96″ long) for an Ammonia Plant

October 22, 2008
Ball-Joint Sway Strut Assemblies (20,000 lb. load, 96" long)
Ball-Joint Sway Strut Assemblies (20,000 lb. load, 96" long)

The overall length of each sway strut is 96 inches. The pipe hanger assembly is designed to control 20,000 lb. of piping load during the system’s thermal expansion and contraction.

These sway struts have a ball joint located at each end connected by an extension rod that controls the piping system through its complete range of thermal piping movements. It is used to restrain movement of piping in one direction while providing for movement due to thermal expansion or contraction in another direction.

Do you require sway struts in your current or upcoming project? Get pricing today!
request-a-quote

240" Sway Strut for a Local Refinery

September 19, 2007
240" Sway Strut for a Local Refinery
240" Sway Strut for a Local Refinery

This sway strut is fabricated from carbon steel and measures 240″ from pin to pin. The pipe is 6″ in diameter and has a load capability of 15,000 lbs. The components were completed with a hot-dipped galvanize finish and the pipe was coated with a shop primer. The function of a sway strut is to restrain movement of piping in one direction while providing for movement due to thermal expansion or contraction in another direction.

This particular sway strut will support a 30″ process line in a refinery. This type of support is necessary, because the current line has only a few I-beams for support. Additionally, the I-beams that support the line are very high off the ground and not capable of handling the large forces acting on the line. Due to the loads acting upon the pipe and length of the required strut, a heavy schedule pipe and heavier duty strut ends were necessary.

Do you require sway struts in your plant or refinery? Get pricing today!
request-a-quote


2 Sway Strut Hangers for a Power Generating Station

December 21, 2005
 2 Sway Strut Hangers for a Power Generating Station
2 Sway Strut Hangers for a Power Generating Station

 2 Sway Strut Hangers for a Power Generating Station
Alternate View of Sway Struts

Sway struts are used to restrain movement of piping in one direction while providing for movement due to thermal expansion or contraction in another direction. These sway struts are made of ASTM A387 GR22 weighing at 1,485 lbs each. They are 6″ in diameter and 8’2″ long and are used for main steam valve supports with specifically designed spacers, pins, and retainers capable of restraining movement up to 90,000 lbs at high temperatures exceeding 750F. The turnaround time for this was 6 weeks.

Do you see a need for sway struts in your current application? Get pricing today!
request-a-quote


Two 15’-0” long Carbon Steel Sway Struts for a Cycle Unit Project

September 5, 2003
Two 15’-0” long Carbon Steel Sway Struts for a Cycle Unit Project
Two 15’-0” long Carbon Steel Sway Struts for a Cycle Unit Project

Sweco Fab recently designed and manufactured two carbon steel sway struts with 2” adjustment capabilities for a cycle unit project. The sway strut is constructed of an 8” diameter pipe, 130 ¼” long, assembled with rod ends and brackets for an overall assembly length of 15’-0”. The 2” adjustment capability is accompanied by a load capacity up to 128 KIPS. Sway struts are used to restrain movement of piping in one direction while providing movement from thermal expansion or contraction in another direction.

Do you see a need for sway struts in your piping system? Let us price them for you today!

request-a-quote


Specially Fabricated Sway Struts and Mechanical Snubbers

February 9, 2000
Specially Fabricated Sway Struts and Mechanical Snubbers
Specially Fabricated Sway Struts and Mechanical Snubbers

The photograph above shows sway struts and mechanical snubbers, which are combined and attached to large pipes and to stable structures. The snubber will dampen shocks and vibrations caused by sudden opening and closing of valves or even earthquakes. Piping Technology & Products, Inc. fabricated these for the steam piping in a power plant.

Are you in need of sway struts and mechanical snubbers for an upcoming project? Get pricing today!

request-a-quote

Sway Struts for a 250 MW Power Plant

February 26, 1993
Sway Struts for a 250 MW Power Plant
Sway Struts for a 250 MW Power Plant

The picture seen above is a mechanical snubber attached to a rod with a pipe clamp. Below the snubber is a rigid sway strut for 36” pipe and four smaller sway struts. The snubber will dampen sudden shocks and vibrations in the piping system. These show the variety of built by Piping Technology & Products, Inc. for a 250 megawatt power plant.

Do you require snubbers or sway struts for an upcoming project? Get pricing today!
request-a-quote

Top