Tag: Variable Furnace Spring Supports

240 Type-C Furnace Springs Supplied to Indonesia

December 16, 2019

 

240 Custom Designed Type-C Furnace Springs For A Furnace Application In Indonesia

Type: Variable Spring Supports
Size: 95-1/16” Overall Length
Material: A36 Carbon Steel
Design:  2,033 lb. Load | 225 lb./in Spring Rate
Testing: Load and Travel Tests

PT&P custom designed 240 of these Type-C furnace springs for a customer in Indonesia. The assemblies are completely fabricated from A36 carbon steel with a red oxide primer finish. The completed spring hanger assemblies are 95-1/16” overall length. They are designed for an operating load of 2,033 lbs and have a spring rate of 225 lbs./in. To ensure quality the furnace springs had a spring load test report and a spring calibration test to ensure spring rate shall not deviate more than +/- 5% from catalog value.

251 Variable Furnace Springs for a Chemical Plant in Virginia

April 2, 2012

Variable Furnace Springs

Close-Up Of Furnace Variable Spring251 variable furnace springs were designed and fabricated for fertilizer production at a chemical plant in Virginia. The furnace cans are carbon steel and painted with red-oxide primer to avoid any potential hazards where exposed to high temperatures. This project included figures: PTP-1-120, PTP-2-150, PTP-2-180, PTP-4-100 and PTP-4-200 variable furnace springs with operating loads ranging from 1,042 lb. to 15,512 lb. A load test on all variable springs was conducted prior to shipment.

Webinar General

Live New Webinar

Sign-up for a Live Technical Webinar…

Piping Design Course 300Width

Online Course

Piping Design and Analysis Influence on Pipe Support Selection and Design

Surveying a piping system? Need to change a current system?

This course is also great for…

• New Engineers, Management and Operations
• Field, Process, Maintenance and New Engineers
• Piping and Piping System Designers and/or Instructors

*This online course is approved for 8 hrs. P.E. Credits

Register Now
Top