PT&P custom-designed pipe clamps for an ammonia facility in Louisiana. The clamps are designed for a 42″ diameter pipe and are fabricated from chrome moly and painted for a high heat application. The clamps support up to a 6,295 lb. load in an operating temperature range from -50 to 1000°F.
Read More
24″ Diameter HD-2 Hold-Down Clamps for a Natural Gas Plant in Colorado.
PT&P designed and manufactured these standard HD-2 hold-down clamps for a natural gas plant in Colorado. They are fabricated from carbon steel and designed with PTFE slide plates. The hold-downs are designed for 8″ to 24″ diameter pipes and operating temperature up to 400°F.
Read More
This presentation will cover Pipe Clamps, including Hold-Down Clamps, Riser Clamps, Clevis Hangers, Yoke U-Bolt Clamps and Structural Supports. Learn how the appropriate type of pipe support is chosen based on the different design conditions. Find out how Finite Element Analysis is used in the design process and view the custom pipe supports designed for extreme applications.
Read More
PT&P designed spring loaded stainless steel roller stands for a wastewater treatment plant. The rollers were custom designed for ease of assembly to support a 30″ diameter pipeline. They include eight springs in two spring housings and are designed for 1,000 lb. load. The base plate is 18-3/4″ x 13″ and the BOP is 10-3/16″. Roller stands are used to support pipelines that expand and contract longitudinally in the axial direction and where vertical adjustment is not necessary.
Read More
PT&P fabricated 1,328 hold-down pipe clamp assemblies for insulated pulsating gas pipelines. They are fabricated from carbon steel and designed with PTFE slide plates and kinetics-vibroisolating pads. The hold-downs are designed for 2″ to 8″ diameter pipes and operating temperatures ranging from -20°F to 750°F.
Read More
PT&P supplied sixty-nine adjustable pipe saddle supports for a hydrocracker project in an oil refinery. The supports will be installed under a trunnion and range in heights from 12″ to 48″. They have 8″ diameter top plates, and are designed to support pipes from 2″ to 8″ in diameter. The supports are fabricated from carbon steel and consist of schedule 40 and 80 pipes and concentric reducers. The operating temperature for these custom-designed saddle supports is 750″F. Each assembly was inspected by Q.C. prior to shipment.
Read More
PT&P designed and manufactured 282 instrument supports to support a six-drum coker unit in a refinery in Indiana. Some of the assemblies are designed to be bolted by anchor bolts while others are designed to be welded. The supports are fabricated from hot-dipped galvanized carbon steel and measure 11″ – 61″ in height and 5″ – 28″ in width.
Read More
PT&P designed custom hold-down pipe clamps for pipe sizes ranging in diameters from 6″ to 14″ at a natural gas facility. The HD-3 is an arrestor type hold down used when there is very low thermal movement and these clamps are similar to them but differ due to their adjustable bases. These clamps are fabricated from galvanized carbon steel and include a neoprene lining to absorb vibration.
Read More
PT&P designed and fabricated forty-seven hold-down pipe clamps for a coal-fired power plant in Louisiana. The hold-downs are fabricated from carbon steel and range in size from 2″ to 10″ in diameter. The HD-3 is an arrestor type hold down used when there is very low thermal movement. Its radius is lined with a belting material that is well designed to absorb shock from vibration.
Read More
These Fig. 46 adjustable pipe saddle supports are designed for pipe sizes 12” to 14” diameter for an oil refinery. They are fabricated from carbon steel and are capable of supporting up to a 4,920 lb. load. A total of twelve supports were fabricated, quality inspected and tested prior to shipment.
Read More