Blog Category: SUPPORT ASSEMBLY COMPONENTS | Piping Technology & Products, Inc.

3 Wedge Action Mechanical Joints for a Suspension Bridge

January 25, 2006

Three wedge action mechanical joint restraints made of ductile iron materials were utilized to assist in the construction of a suspension bridge. Also, these mechanical joints provide for vertical and axial restraint for the bridge. Each weighs approximately 300 lb. and measures 24” long by 16” wide, and 12” tall for a 6”, 10”, and 12” ductile iron pipe. They are capable of supporting 50,000 lb. In addition, they are designed for seismic conditions with the ability for 7” of axial travel.

Do you require similar supports as those described above? Get pricing today!

Roller Stands for a Company that Manufactures "Fired Heaters"

December 14, 2005

Roller Stands For A Company That Manufactures &Quot;Fired Heaters&Quot; — Roller Stands for a Company that Manufactures "Fired Heaters"

: Load Testing Rollers

Roller stands are used to support pipelines that expand and contract longitudinally in the axial direction and where vertical adjustment is not necessary. These roller stands are made of stainless steel and designed for a 26″ pipe. They weigh 160 lbs and are capable of supporting 7,500 lbs. Load testing at 1,000F was completed for performance assurance.

Do you require roller stands like those described above? Get pricing today!

930 Rod Hangers & Riser Clamps for a Construction Company

October 26, 2005

930 Rod Hangers &Amp; Riser Clamps For A Construction Company — 930 Rod Hangers & Riser Clamps for a Construction Company

These rod hangers and riser clamps are made of carbon steel. They are capable of supporting 6 to 16 diameter pipes and loads of up to 2,435 lbs. They are used to support and stabilize piping systems and withstand temperatures up to 650 F. The shipment weighed 21,200 lbs.

Do you see a need for rod hangers and/or riser clamps in your piping system? Get pricing now!

Three-Bolt Clamps for a Power Plant

August 19, 2005

These three-bolt clamps were designed to support operating loads from 19,000 lbs. to 25,000 lbs. These clamps were custom designed for 650F and pipe sizes from 6 to 22. They are constructed of carbon steel with weight ranging from 28 lbs. to 322 lbs.

Want to learn more about three-bolt clamps? View a past pipe clamp webinar today!

Eight Polyurethane Pipe Rollers for a Gas Plant

May 20, 2005

Piping Technology & Products, Inc. designed and manufactured eight polyurethane pipe rollers for a gas plant in California. These 24 non-conductive pipe rollers are fabricated from polyurethane. They were pre-tested for an operation load of 6,100 lbs. The purpose of these polyurethane pipe rollers is to support gas piping where a non-conductive support is required.

Do you require pipe rollers in your piping system? Let us price them for you today!

26,500 lbs. Load Three-Bolt and Riser Clamps

March 25, 2005

These Three-bolt and Riser Clamps, constructed of A36 carbon steel, were custom designed to support up to 26,500 lbs. load. With a weight of 210 lbs. each, they are capable to support both horizontal and vertical piping. To ensure quality, they were inspected for dimensional criteria and visual settlement using a section of a 24” pipe.

Want to learn more about pipe clamps? View a past pipe clamp webinar today!

Long Tangent U-Bolts for Refinery

February 4, 2005

Piping Technology & Products, Inc. recently custom designed and fabricated eight long tangent U-bolts for an oil refinery in Texas. The carbon steel U-bolts can support pipes ranging from 8” to 16”. They are designed to support loads up to 9,900 lbs. and temperatures to 650° F. The products weigh between 3 lbs. and 9 lbs. U-bolts are recommended to support or guide heavy loads. They are often employed in power and process plants, as well as in marine service.

Do you see a need for u-bolts in your plant or refinery? Get pricing today!

17,000 lb. Load Horizontal Travelers for Hydrogen Reformer

October 22, 2004

Piping Technology & Products, Inc. custom designed and manufactured four PTP-2 type G horizontal travelers to be used at a hydrogen reformer in Chile. The travelers are designed for a horizontal travel range of 12″ and an operating load capacity of 1400 lbs. and 17,000 lbs. They are fabricated out of A36 carbon steel with dimensions of 3 1/2″ x 6″x 16″ and 6″ x 10″x 18″. These horizontal travelers will maintain hanger rods in vertical position at the hydrogen reformer. Load testing was performed to ensure product quality prior to shipping.

Do you see a need for horizontal travelers in your piping system? Get pricing now!

Thirty PT&P Fig. 70A Clamps for a Power Plant

May 28, 2004

Thirty Pt&Amp;P Fig. 70A Clamps For A Power Plant — Thirty PT&P Fig. 70A Clamps for a Power Plant

Piping Technology and Products, Inc. recently designed and fabricated thirty PT&P Fig. 70A clamps to fit 14″ to 18″ pipes at a power plant in Florida. These clamps are designed for suspension of hot pipe lines where there is a high temperature and great thermal movement. The clamps are fabricated from SA 387 Gr. 22 alloy steel for temperatures of 1065F and loads of 8,000 lb. to 25,000 lb. These 160 to 395 lb. clamps have dimensions checked and a fit up test preformed prior to shipping.

Want to learn more about pipe clamps? Instantly view a past pipe clamp webinar!

Riser Clamp Assemblies with Neoprene Lining

May 7, 2004

Piping Technology and Products, Inc. custom designed eight sets of riser clamp assemblies for an oil rig in the Gulf of Mexico. These riser clamp assemblies were fabricated from API 2H GR. 50 carbon steel. They were designed to support vertical pipe lines on an offshore platform. Each set equipped with a neoprene lining consists of two clamps and a clamp stand. Several coats of marine paint finish were applied to the assemblies to prevent corrosion due to high salt water content and open air exposure.

Do you require riser clamps in your piping system? Get pricing today!

Cookie	Duration	Description
cookielawinfo-checkbox-analytics	11 months	This cookie is set by GDPR Cookie Consent plugin. The cookie is used to store the user consent for the cookies in the category "Analytics".
cookielawinfo-checkbox-functional	11 months	The cookie is set by GDPR cookie consent to record the user consent for the cookies in the category "Functional".
cookielawinfo-checkbox-necessary	11 months	This cookie is set by GDPR Cookie Consent plugin. The cookies is used to store the user consent for the cookies in the category "Necessary".
cookielawinfo-checkbox-others	11 months	This cookie is set by GDPR Cookie Consent plugin. The cookie is used to store the user consent for the cookies in the category "Other.
cookielawinfo-checkbox-performance	11 months	This cookie is set by GDPR Cookie Consent plugin. The cookie is used to store the user consent for the cookies in the category "Performance".
viewed_cookie_policy	11 months	The cookie is set by the GDPR Cookie Consent plugin and is used to store whether or not user has consented to the use of cookies. It does not store any personal data.