72 Bolt Cradle Pipe Supports Designed for a Sulphuric Acid Plant

December 30, 2013

72 Bolt Cradle Pipe Supports Designed for a Sulphuric Acid Plant

PT&P manufactured seventy-two bolt cradle pipe supports for a Sulphuric Acid Plant in Canada. The supports are designed for pipes ranging from 1-1/2″ to 20″ in diameter. They are fabricated from carbon steel and coated with a special protective paint for acid service. Standard bolt cradle supports are offered in 2″ to 24″ diameter pipe sizes; however, PT&P can manufacture any size needed for your application.

Read More

Pipe Guides Designed for a Recovery Boiler

December 1, 2013

Pipe Guides Designed for a Recovery Boiler

These pipe guides were designed for a recovery boiler in a power plant in Oklahoma. The guides were designed to control lateral pipe movement and maintain the alignment of the piping through its axial and contraction cycles. They were designed to support 6″, 12″ and 18″ pipes and range in length from 70″ – 120″. The assemblies were fabricated from carbon steel with a hot-dipped galvanized finish.

Read More

81 Pipe Shoes Designed for a Solar Power Plant in California

August 24, 2013

81 Pipe Shoes Designed for a Solar Power Plant in California

PT&P designed and manufactured eighty one custom pipe shoes for a solar power plant in California. The shoes will support heat transfer in fluid pipes at the facility. They consist of 3/8″ stainless steel slide plates and microtherm insulation. The shoes measure 10″ wide, 10″ height, and 18″ in length with a 750°F operating temperature. The assemblies have a vertical operating load of 10,000 lb. with 2″- 3″ of axial movement.

Read More

Clamp-On Pipe Shoe Assemblies Were Custom Designed For A Gold Mine Project

April 30, 2012

Clamp-On Pipe Shoe Assemblies Were Custom Designed For A Gold Mine Project

These fabricated clamp-on pipe shoe assemblies were custom designed for a gold mine project in the Dominican Republic. They are composed of a clamp-on pipe shoe subassembly combined with a carbon steel pipe extension. A total of nineteen pipe shoes were fabricated for 3″, 4″ and 6″ diameter pipes. The extensions were designed at various heights to position the pipe line at the correct elevation for a sloping line. When a design includes a closed off section, PT&P’s standard is to incorporated vent holes in order to prevent moisture build-up. They are painted with a two-coat paint system to protect against corrosion and include stainless steel tags to easily identify the product code.

Read More

Pipe Shoes Designed for Main Steam Piping in a Gold Mine Project

April 16, 2012

Custom Designed Pipe Shoes

These custom designed pipe shoes were fabricated for main steam piping in a gold mine project. A total of forty-three pipe shoes ranging in size from 20″ to 36″ diameter were designed for temperatures up to 650°F. The shoes ranged in length from 17″ to 24″, width from 20″ to 32″ and height from 3″ to 7″. They are manufactured from carbon steel and have a two-coat paint system to protect against corrosion.

Read More

24" Bolted Clamp Pipe Shoe with Slide Plates for a Radiant Syngas Cooler Piping System

August 29, 2011

24" Bolted Clamp Pipe Shoe with Slide Plates for a Radiant Syngas Cooler Piping System

These customized bolted clamp pipe shoes with PTFE, 25% glass filled slide plates were fabricated for a radiant syngas cooler piping system in Indiana. The supports were designed for 24″ diameter piping with a pressure of 2,256 psig at 350°F. The axial displacement is +/- 1.326″ facilitated by slide plates on three quadrants. These pipe shoes were custom designed and fabricated entirely from carbon steel with a hot-dipped galvanized finish.

Do you have a requirement for bolted clamp pipe shoes? Let us price it today.

request-a-quote

Read More

Custom Designed Pipe Clamp-Guides for an LNG facility in Algeria

June 6, 2011

Custom Designed Pipe Clamp-Guides for an LNG facility

These pipe clamp-guides were custom designed and fabricated for a 4″ pipe vertical run in an LNG facility. They measure 16″ from the bottom of the W-beam to the centerline of pipe and designed for temperatures up to 750°F. The clamp-guides were fabricated from carbon steel and include a hot-dipped galvanize finish.

Want to learn more about pipe clamps? Instantly view a recording of a past pipe clamp webinar. access-our-webinar-archives

Read More

Custom Elevated Pipe Shoe-Clamp Supports Designed for a 12" Diameter Transfer Line in a Polymer Plant

March 28, 2011

Custom Elevated Pipe Shoe-Clamp Designed for a 12" Diameter Transfer Line in a Polymer Plant

PT&P designed and manufactured custom elevated pipe shoe-clamp supports for part of a palletizer transfer line in a polymer plant. The custom supports were designed to prevent cracking in the welds and grout base due to severe vibration in the line. The assemblies have an overall height of 48″ with an adjustable load column. The clamp-shoes are 13″ wide by 14″ long, and designed for a 12″ diameter aluminum pipe. The assemblies are carbon steel with a hot-dipped galvanize finish and include a unique laminated vibration dampening lining for the clamp.

Custom Elevated Pipe Shoe-Clamp Designed for a 12" Diameter Transfer Line in a Polymer Plant

 

 

 

 

 

 

 

 

 

request-a-quote


Read More

Stainless Steel Trunnions for an LNG Plant

August 13, 2008

Stainless Steel Trunnions for an LNG Plant
Stainless Steel Trunnions for an LNG Plant

These stainless steel trunnions are designed to support a vertical pipe used in an LNG plant. The trunnions will support stainless steel pipes with diameters ranging between 24″ and 42″. The diameter of the trunnions ranges in size from 12″ to 22″. The overall length is 34″. All of the weld seams were 100% dye-penetrant tested before being shipped to the plant.

Do you see a need for trunnions in your current or upcoming project? Get pricing!
request-a-quote

Read More
Top