Blog Category: PRE-INSULATED PIPE SUPPORTS

Insulated Pipe Supports for Temperatures as Low as -260°F for a 30" Diameter Pipe in a LNG Receiving & Regasification Plant and Refinery
January 25, 2011

Cryogenic Supports For A Lng Receiving &Amp; Regasification Plant And Refinery

These cryogenic supports (also known as cold shoes) are fabricated from 20 PCF polyurethane insulation, weigh 650 lb. each and are designed for 30″ diameter pipe. They are comprised of a carbon steel base plate and bearing plate, a vapor barrier and an aluminum jacket. The supports are designed for temperatures as low as -260°F, and measure 27″ length by 44″ height. A total of thirty-four supports were fabricated for natural gas applications, including storage and transport.

Do you see a need for cryogenic supports in your piping system? Get a quote today!

Request-A-Quote

Read More

Take a Look into the Past: Insulated Pipe Supports
December 17, 2010

Check out our most recent article that looks at the history of insulated pipe supports through the past 100 years.  Learn about the developments made in the 1950’s and 1960’s that introduced the use of “Foam Glass”, a lightweight material that is manufactured primarily from recycled glass and used in the design of insulated pipe supports. Later, polyurethane was developed to provide greater load carrying capabilities. Read the full article on the:

History of Insulated Supports

Permali&Reg; Insulated Pipe Anchors
Permali® Insulated Pipe Anchors

Want to learn more about pre-insulated supports? Instantly view a past pre-insulated support webinar now!
Access-Our-Webinar-Archives

Read More

Cryogenic Supports with Permali® Insulation for an LNG Plant in Abu Dhabi
December 6, 2010
Cryogenic Supports With Permali&Reg; Insulation For An Lng Plant In Abu Dhabi
Cryogenic Supports with Permali® Insulation

Over 30 cryogenic supports fabricated from a combination of carblon steel, permali® block and stainless steel were manufactured for an LNG plant in Abu Dhabi. The shoes measures 18″ x 14″ x 12″ and are designed for 10″ of thermal movement and temperatures as low as -167°C. The cold shoes are coated with a custom paint job and went through standard testing prior to shipment.

Have a need for cryogenic supports in a current or upcoming project? Get a quote today!
Request-A-Quote

Read More

Sliding Cryogenic Insulated Supports for a 60" Diameter Vapor Line
October 25, 2010
Sliding Cryogenic Insulated Supports For A 60&Quot; Diameter Vapor Line
Sliding Cryogenic Insulated Supports

These sliding cryoshoes are fabricated from carbon steel with 2″ thick polyurethane insulation. The polyurethane is 20 lb. density, which has a compressive strength of 500 psi and a tensile strength of 600 psi. The cold shoes are designed for temperatures as low as -300°F and for loads up to 3,500 lb. They will be used to support a 60″ diameter low temperature vapor line in a Texas facility.

Want to learn more about cryogenic supports? Instantly view a past webinar now!

Access-Our-Webinar-Archives

 

Read More

Cryogenic Pipe Supports with Micarta Insulation for a LNG Plant
September 28, 2010

Cryogenic Pipe Supports With Micarta Insulation For A Lng Plant

These cold shoes are fabricated from stainless steel and carbon steel with Micarta insulation. The supports vary in length from 12″ to 36″ and are capable of temperatures as low as -260°F. 40 supports in total were fabricated and hot dipped galvanized for corrosion protection at a LNG plant.

Do you see a need for cryogenic supports in your piping system? Get pricing today!
Request-A-Quote

Read More

Updated: Pre-Insulated Pipe Support Catalog
September 3, 2010

We’ve been making some big changes on our pre-insulated pipe support online catalog. These changes have made it a lot easier for you to navigate the site and find the best hot or cold pipe shoe to fit your needs!

Some of the new features include:
– Drop down menu
– Catalog Search Box
– Catalog Price Request form Embedded in Page
– Easy to navigate glossary of terms

…and more! We look forward to serving your pre-insulated pipe support needs.

Read More

Cold Shoe Anchors with Micarta Insulation for a LNG Plant
August 3, 2010

Cold Shoe Anchors With Micarta Insulation For A Lng Plant

The cold shoes are fabricated from a combination of carbon steel, micarta insulation, and stainless steel. They measure 18″ x 12″ x 10″ and are designed for 7″ of lateral movement with temperatures as low as -162°C. A total of 16 supports were manufactured and PMI tested. This was a rush order completed in just under 12 weeks for a LNG plant.

Want to learn more about pre-insulated supports? Instantly view a pre-insulated support webinar! Access-Our-Webinar-Archives

Read More

Insulated Trunnions for a LNG Plant
July 27, 2010

Insulated Trunnions For A Lng Plant

Piping Technology & Products, Inc. manufactured 29 insulated trunnions ranging in NPS from 1.5″ to 10″ with the larger trunnion measuring 54″ in height. The trunnions were fabricated from 304 stainless steel with Micarta insulation. They will be used in an LNG plant as insulated pipeline elbows.

Do you see a need for insulated trunnions in your plant? Get pricing today!
Request-A-Quote

Read More

399 Pre-Insulated Pipe Supports for a LNG Facility
June 29, 2010
Pre-Insulated Pipe Supports For 56&Quot; Pipe Size
Pre-Insulated Pipe Supports for 56" pipe size

Piping Technology & Products, Inc manufactured the pre-insulated supports with 4″ of insulation thickness for pipe sizes ranging from 36″ to 56″ in diameter.

Pre-Insulated Pipe Supports For 36&Quot; Pipe Size
Pre-Insulated Pipe Supports for 36" pipe size

The cold shoes were fabricated from a combination of 10 and 20 PCF of polyurethane insulation. They also include a vapor barrier, aluminum jacket, acoustic layer, and are coated with a hot dipped galvanized finish. The supports will be used for a project in North Africa.

Want to learn more about pre-insulated supports? Watch a recording of a past webinar!
Access-Our-Webinar-Archives


Read More

Pre-Insulated Pipe Supports for an LNG Plant
June 1, 2010
Pre-Insulated Pipe Supports For An Lng Plant
Pre-Insulated Pipe Supports for an LNG Plant

PT&P manufactured a total of 1,400 supports for an LNG project. 75 of those supports were cold supports completed in less than one week on an emergency basis. The cold shoes were fabricated from a combination of polyurethane foam, carbon steel metal straps, and an aluminum metal jacket for insulation. They are designed for temperatures as low as -300°F and pipe sizes ranging from 12″ to 36″ in diameter. The 36″ diameter shoes are designed for a vertical load of 102,000 lb. and the 12″ diameter shoes are designed for 36,000 lb. load.

Do you require pre-insulated supports in your piping system? Get a quote from us now!
Request-A-Quote

Read More
Top