Blog Category: PRE-INSULATED PIPE SUPPORTS | Piping Technology & Products, Inc.

Refractory Lined Pre-Insulated Supports

June 18, 2008

Piping Technology & Products, Inc. designed and fabricated rotational anchor pre-insulated pipe supports for a fluid processing plant in Kuwait. The supports range in size from 24″ to 34″ in diameter and are capable of withstanding 12,500 lb. of vertical load. The bottom of the hot shoe is fabricated from carbon steel and the top from stainless steel.

These supports include stainless steel inner thrust plates that function as an anchor to prohibit the pipe from rotating within the shoe. These supports are designed for steam super heater lines and provide thermal insulation for the pipe in order to prevent heat loss and condensation.

Want to learn more about pre-insulated supports? Instantly watch a pre-insulated support webinar!

Polyurethane Saddle Supports for FRP Pipe

April 2, 2008

Piping Technology & Products, Inc. designed and fabricated these saddle supports to support FRP pipe or similar plastics in sizes from 2″ to 36″ in diameter. The saddle support is fabricated from a molded density 20 polyurethane block with a load bearing capacity of 150 PSI that allows for high loads for a 36″ diameter line.

The base is bonded to a 20 gauge steel pan that provides a steel to steel resting surface. The foam is extended on each side of the base to allow field strapping of the support to the pipe. These saddle supports are often used in a circulating water service. These particular supports are to be used in a power generating station in the U.S.

Do you require similiar saddle supports for your application? Let us price them for you!

Permali® Cold Shoes for Carbon Steel Pipe

March 12, 2008

These cold shoes are anchors supports and fabricated with A-36 carbon steel and permali® block insulation. The carbon steel is hot-dipped galvanized for protection and longevity of the cold shoe. The permali® block insulation, between the base plate and the saddle, functions to insulate the supporting structure from extreme cold temperatures of the pipe.

These cold shoes are designed for pipes ranging in size from 6″ to 14″. The assemblies are capable of loads ranging from 194,000 lb. to 291,000 lb.

Want to learn more about pre-insulated supports? Instantly view a past webinar today!

24" Heavy Duty Cryogenic Pipe Supports

February 6, 2008

24&Quot; Heavy Duty Cryogenic Pipe Supports — 24" Heavy Duty Cryogenic Pipe Supports

These pipe supports were designed for a petrochemical plant in Puerto Rico. The nominal pipe size of the supports ranges between 16″ and 24″. The cryogenic supports are fabricated from carbon steel and include a stainless steel jacket. They are insulated with polyurethane foam and are designed for temperatures between -270ºF and 85ºF. The load capacity ranges between 5,000 lb. and 11,900 lb.

Want to learn more about cryogenic pipe supports? Instantly view a past webinar!

36" Cold Shoe Anchors for an LNG plant in Louisiana

November 28, 2007

36&Quot; Cold Shoe Anchors For An Lng Plant In Louisiana — 36" Cold Shoe Anchors for an LNG plant in Louisiana

These cold shoe anchors are designed to support pipe sizes ranging from 8″ to 36″ in diameter. The measurements of the base plate are between 18″ and 36″ in length and between 8″ and 22″ in width. The saddle is fabricated from stainless steel and the base plate is galvanized steel. Micarta insulation material, between the base plate and the saddle, functions to insulate the extremely cold pipeline. These cold shoe anchors are manufactured for large axial and lateral capacities.

Want to learn more about pre-insulated pipe supports? View a pre-insulated pipe support webinar today!

Base Insulated Supports

October 31, 2007

PT&P fabricated base insulated supports used to minimize thermal conductivity between the base and un-insulated lines. The support is designed with a carbon steel bottom and a stainless steel upper for cryogenic temperatures of -300°F. The insulation is made of 20 PCF polyurethane block. These supports are designed to handle lateral and axial pipe loads. They also include a wear pad for extra pipe reinforcement, which prevents local deformation of the pipe.

Do you require base insulated supports for project? Let us price them for you today!

Injection-Molded Anchors for an LNG Plant

June 27, 2007

These supports are used in a re-gasification terminal and are designed for -29°C ambient and -196°C fluid temperatures. The polyurethane foam insulation is injected into a mold with a pipe spool in place to ensure maximum fit. The pipe anchors are made from 516 Grade 70-N carbon steel. These supports were put through Finite Element Analysis and inspected by our Quality Control Department.

	42″ NPS	20″ NPS	6″ NPS
Axial Load:	136,000 lb.	62,500 lb.	9,773 lb.
Vertical Load:	40,000 lb.	14,773 lb.	5,682 lb.
Lateral Load:	15, 909 lb.	11, 364 lb.	2,273 lb.
Foam Density:	32 lb. PCF	32 lb. PCF	20 lb. PCF

Want to learn more about pre-insulated supports? View a pre-insulated support webinar today!

Cold Insulated Pipe Anchors for an LNG Plant

June 6, 2007

Piping Technology & Products designed and fabricated 36″ diameter insulated pipe anchors that included base stops to prevent lateral and axial movement of the anchor.

The design of the insulated stop plates allows the anchor to withstand 63,000 lbs of axial load. The use of Polyurethane insulation allows for operating temperatures down to -300°F.

Do you require insulated pipe anchors for your piping system? Get pricing today!

Trunnion Base ELL Supports for a Cryogenic Line

February 21, 2007

– Cryogenic Trunnion Base ELL Supports
– Designed for temperatures of -300°F
– Insulated supports are for an LNG receiving, storage and regasification terminal

Do you have a requirement for Trunnion Base ELL supports? Let us price them for you!

Cryogenic Supports for an LNG Plant

January 24, 2007

Belleville spring washers are installed on the studs to keep tension on the bolts due to pipe contraction at cryogenic temperatures. The top half of the cold shoe is constructed of 10 lb density polyurethane foam and the bottom half of the shoe is constructed of 20 lb density polyurethane foam to support the weight of the pipe.

Want to learn more about pre-insulated pipe supports? Instantly view a past webinar!

Cookie	Duration	Description
cookielawinfo-checkbox-analytics	11 months	This cookie is set by GDPR Cookie Consent plugin. The cookie is used to store the user consent for the cookies in the category "Analytics".
cookielawinfo-checkbox-functional	11 months	The cookie is set by GDPR cookie consent to record the user consent for the cookies in the category "Functional".
cookielawinfo-checkbox-necessary	11 months	This cookie is set by GDPR Cookie Consent plugin. The cookies is used to store the user consent for the cookies in the category "Necessary".
cookielawinfo-checkbox-others	11 months	This cookie is set by GDPR Cookie Consent plugin. The cookie is used to store the user consent for the cookies in the category "Other.
cookielawinfo-checkbox-performance	11 months	This cookie is set by GDPR Cookie Consent plugin. The cookie is used to store the user consent for the cookies in the category "Performance".
viewed_cookie_policy	11 months	The cookie is set by the GDPR Cookie Consent plugin and is used to store whether or not user has consented to the use of cookies. It does not store any personal data.