58" Floating Rings for a Process Plant

January 31, 2007
58 Floating Rings for a Process Plant
58 Floating Rings for a Process Plant
58" Floating Rings for High Temperatures of up to 1200°F for a Polypropylene Plant
Floating Ring in the Field
58" Floating Rings for High Temperatures of up to 1200°F for a Polypropylene Plant
58" Floating Ring Being Installed
58" Floating Rings for High Temperatures of up to 1200°F for a Polypropylene Plant
Floating Ring in the Field

58″ Floating Rings
– Sizes Range from 19″ I.D. to 91 1/2″ I.D.
– ASTM A-240 Grade 316H Stainless Steel
– 100% Dye Penetrant Tested on all Weld Seams

Do you have a requirement for floating rings in your piping system? Get pricing today!
request-a-quote


Read More

Steel Structural Supports for an Aluminum Smelter Plant

January 10, 2007
Steel Structural Supports for an Aluminum Smelter Plant in Iceland
Steel Structural Supports for an Aluminum Smelter Plant in Iceland
Steel Structural Supports for an Aluminum Smelter Plant in Iceland
Steel Structural Supports
Steel Structural Supports for an Aluminum Smelter Plant in Iceland
Steel Structural Supports

Structural Supports fabricated for an aluminum smelter plant located in Iceland
– Designed to support a process piping system
– Process piping is secured by u-bolts to the slotted supports
– Three coat paint system applied

Do you have a need for structural supports in your current project? Get pricing today!
request-a-quote


Read More

Pressure Vessel in an Emergency Situation for a Gas Company in Florida

November 8, 2006
Pressure Vessel in an Emergency Situation for a Gas Company in Florida
Pressure Vessel in an Emergency Situation for a Gas Company in Florida

– 24″ Diameter Horizontal Pressure Vessel
– Repaired Welds on Flange & Shell
– 12 hr. Turn Around Time
– Hydro-Tested at 1500 PSI
– Held for 1 hr. at 80˚F
– 100% X-Ray

Do you require a pressure vessel or tank for your application? Get pricing today!

request-a-quote


Read More

4 Pig Launchers and Receivers for a Petroleum Company

May 17, 2006
4 Pig Launchers and Receivers for a Petroleum Company
4 Pig Launchers and Receivers for a Petroleum Company

These pig launchers were manufactured from carbon steel. They have a 16 major barrel, 12 minor barrel and measured 121 long. The pig launchers and receivers are used for cleaning piping systems. In addition, the pig launchers and receivers were designed for pressures of 512 PSIG at 100F. Hydro-tests were performed at 666 PSIG and x-ray tests were completed to ensure quality performance.

Do you require pig launchers or receivers in your piping system? Get pricing today!
request-a-quote


Read More

Pressure Vessel for a Chemical Company

April 19, 2006
Pressure Vessel for a Chemical Company
Pressure Vessel for a Chemical Company

 

Pressure Vessel for a Chemical Company
Top of Pressure Vessel

This pressure vessel is manufactured from carbon steel SA516-70. Its diameter is 48 by 96 tangent to tangent and weighs 2,140 lbs. The pressure vessel is used as a process feed tank and was painted for rust resistance. In addition, the vessel was designed for pressures at 15 PSIG and temperatures at 86F. Hydro-tests were conducted at 20 PSIG and x-ray tests were completed to ensure quality performance.

Do you require a tank or vessel for your current job? Get pricing now!
request-a-quote


Read More

20" Diameter Inlet Air Stack for a Gas Plant in Texas

August 5, 2005
20" Diameter Inlet Air Stack for a Gas Plant in Texas
20" Diameter Inlet Air Stack for a Gas Plant in Texas

 

20" Diameter Inlet Air Stack for a Gas Plant in Texas
20" Diameter Inlet Air Stack for a Gas Plant in Texas

These air stacks were designed for 25 PSIG and 100F. They were fabricated from A106-B carbon steel. They are 20 in diameter x 624 long. Each stack weighs 4,395 lb. To ensure product quality, the Inlet Air Stacks were galvanized externally and internally.

Do you have a need for air stacks like those described above? Get pricing today!


request-a-quote


Read More

60" Diameter Air Tank for a Manufacturing Facility

July 22, 2005

 

60" Diameter Air Tank for a Manufacturing Facility
60" Diameter Air Tank for a Manufacturing Facility
Side View of Air Receiver Tank
Side View of Air Receiver Tank

Sweco Fab, Inc. recently fabricated an Air Receiver Tank for a Manufacturing Facility in Alabama. This 5,400 lbs tank measured 60″ 143″ tangent to tangent and was designed for 170 PSIG and 200 F. It was fabricated from SA516-70 carbon steel. The interior and exterior were painted with standard epoxy paint to provide an interior lining and exterior protection. The tank was hydrotested at 221 PSIG to ensure product quality.

Want to learn more about products from Sweco Fab? View a past webinar today!


access-our-webinar-archives



Read More

Structural Support Units for a Power Plant in California

June 24, 2005
Structural Support Units for a Power Plant in California
Structural Support Units for a Power Plant in California

Piping Technology and Products, Inc. recently designed and fabricated two structural support units for a power plant in California.

The structural supports pipes are made of A106 Gr. B; the beam, angle and plate are made of carbon steel. They have an overall height of 11 feet with a weight of 672 lbs. The purpose of these products is to support a 3 inch intermediate pipe.

Do you see a need for structural supports in your current job? Get pricing today!
request-a-quote


Read More

24" x 30" diameter, 740 PSIG Pig Launchers and Receivers

April 22, 2005

 

24" x 30" diameter, 740 PSIG Pig Launchers and Receivers
24" x 30" diameter, 740 PSIG Pig Launchers and Receivers

The launchers and receivers, with dimensions of 24″ x 30″ x 138″ long and 10″ x 14″ x 132″ long, are designed for 740 PSIG at 170 degrees. One of the Pig Launchers and Receivers composed of a 24″ dia. minor barrel and a 30″ dia. major barrel, while the other one consisted of a 10″ dia. minor barrel and a 14″ dia. major barrel. The major and minor barrels are fabricated from API 5L X 52. To ensure quality, the Launchers and Receivers were 100 % x-rayed and hydro-tested prior to shipment.

Pig Launchers and Receivers are installed in pipelines to launch and receive Pipeline Pigs. Pigs can be used for the cleaning of pipelines. In addition, Pigs can be used for the separation of two products within the same pipeline. Sweco Fab/Piping Technology & Products, Inc. has over 40 years of experience in designing and manufacturing a wide variety of ASME/Misc. Fabricated Products – including Pig Launchers and Receivers.

Do you see a need for pig launchers in your piping system? Get a price quote today!
request-a-quote


Read More

Transition Piece for Olefin Site at Chocolate Bayou

December 10, 2004

Transition Piece for Olefin Site at Chocolate Bayou
Transition Piece for Olefin Site at Chocolate Bayou

Transition Piece for Olefin Site at Chocolate Bayou
Transition Piece in Progress

Sweco Fab, Inc. recently designed and manufactured a 1,900 lb. transition piece for an olefin site at Chocolate Bayou on the Texas Gulf Coast. The product transitions from round to oval and is made of 36″ half pipe construction. The piece measures 36″ x 72″ x 60″ and is constructed of carbon steel. The transition piece will be used to regulate the flow of both air and liquid. Prior to shipping the product was hydrotested to guarantee quality.

Do you require a transition piece in your piping system? Get pricing now!
request-a-quote


Read More
Top