![Original Supports (Not Fabricated By Pt&Amp;P) Original Supports (Not Fabricated By Pt&Amp;P)](https://farm5.static.flickr.com/4147/5093220201_1e0f607c93.jpg)
PT&P received a call to inspect spring supports in operation at a salt water cooler tower. It was quickly determined that replacement supports would be needed due to the heavy corrosion of the original supports not fabricated by PT&P.
![Neoprene Coated Fig. 200 U-Type Upthrust Constant Spring Supports Neoprene Coated Fig. 200 U-Type Upthrust Constant Spring Supports](https://farm5.static.flickr.com/4103/5093220195_3570887a04.jpg)
A total of 40 constant and variable spring supports were fabricated as replacements. Each support was sealed with a neoprene coating over a hot-dip galvanized finish instead of stainless steel. This type of finish will ensure a much longer life-span. The spring supports ranged in loads from 800 lb. to 15,000 lb. with various travel ranges.
![Neoprene Coated Fig. 100 U-Type Upthrust Constant Spring Supports Neoprene Coated Fig. 100 U-Type Upthrust Constant Spring Supports](https://farm5.static.flickr.com/4085/5093220205_2c45cde888.jpg)
Do you need to replace some springs in your plant? Contact us for a quote today!