Variable Spring Hangers Designed for a Plant in Texas

April 22, 2019

Variable Spring Hangers Designed for a Plant in Texas

Type: B-Type Variable Spring Supports
Size: PTP 100 & 200 | 3′ – 8′ ft. Height
Design: 4,000 lb. – 17,000 lb. Loads
Material: HDG Carbon Steel | Neoprene Coated Springs
Testing: Standard Load Test | Q.C. Tests

Piping Technology and Products, Inc. recently designed and fabricated B-Type variable spring supports for a plant in Texas. The operating loads range from 4,000 lb. to 17,000 lb. The variable springs are fabricated from galvanized carbon steel, have neoprene coated steel spring coils, and are designed to operate in environments up to 750°F. They have an overall height range from 3 ft. to 8 ft″. To ensure quality, standard load tests were performed prior to shipment.

Read More

Hold-Down Pipe Clamps Designed for a 36″ Diameter Natural Gas Pipeline

April 8, 2019

Hold-Down Pipe Clamps Designed for a 36" Diameter Natural Gas Pipeline

Type: HD-2 Hold-Down Pipe Clamps
HD Size: 36″ Dia. x 12″ W x 8-7/16″ H
Wedge Size: 23-3/16″ L x 6″ W
Material: Carbon Steel | PTFE
Testing: Standard Q.C. Tests

PT&P designed 50 HD-2 hold-down pipe clamps with wedges for a natural gas pipeline in Texas. They were fabricated from carbon steel and include PTFE slide plates. The hold-downs are designed for a 36″ pipeline, and are 12″ wide by 8-7/16″ tall. The wedges are 23-3/16″ long by 6″ wide. They are designed for an operating temperature on 400°F, and have an adjustable height. Standard quality control test were performed prior to shipment.

Read More
Top