Compact Spring Supports Designed for a Pump Application in Wyoming

November 30, 2015

Compact Spring Supports Designed for a Pump Application in Wyoming

These compact spring supports were custom designed and built within 4 weeks to support a pump for a facility in Wyoming. The housing was fabricated from A-36 carbon steel and hot-dipped galvanized to protect them against corrosion. The disc springs are engineered using the stainless steel Belleville disc springs designed for large loads but small movements. In this case, the springs are designed to support a load of 11,137 lb. and movement of 0.018″ (upward). Each assembly underwent load testing prior to shipment.

The compact size and resistance to corrosion attributes of these compact spring supports make them ideal for placement under the discharge piping of a pump at this facility. By using these compact spring supports directly on the pump, excessive thermal loading on the pump’s discharge nozzle is resolved and brings it within the pump manufacturer’s allowable limit, so the pump will operate safely, as intended which also results in extended life and low maintenance.

Read More

Register for the next Webinar: Engineered Spring Supports (Practical, Hands-on Approach)

November 12, 2015

This webinar is over… view the recording at: https://pipingtech.com/resources/media/webinars/

Live Webinars are worth 1 PDH Credit for TX Professional Engineers

Engineered Spring Supports

Learn how the theoretical applications of spring supports are put into use in the real world. We will start with a review of the working principles of both variable and constant springs. See how brand new spring looks at delivery, and review installation guidelines. Learn the key points to review through the total installation process and subsequently when the springs are in operation. See how to determine if springs need adjustments, re-calibration, refurbishment or replacement. View in field examples, shutdown and isolation procedures. See the selection process required when there are significant changes to the operating condition.

The featured presenter, Jerry Godina has over 16 years experience as a pipe support designer and manages PT&P’s engineer training development program. He also inspects existing supports, consults on site remediation projects and oversees installation on a regular basis.

Read More

Custom F-Type Constant Spring Supports for Oil Refinery

November 6, 2015

Custom Constant Spring Supports for Oil Refinery

PT&P designed 100-F type constant spring supports for an oil refinery in Alabama. These custom constant spring supports are 32” x 12” x 23.5” and designed to support an operating load of 650 lb. with 14” of total travel. The constants are fabricated from A36 carbon steel and the coil is from 5160H alloy material. Standard load and travel testing were completed to ensure the quality and performance of these constants.

Read More
Top