PT&P was called on by an energy center in Oklahoma to inspect failing pipe shoes designed for temperatures ranging from 650 to 1065 °F supplied by another company. After thorough inspection, PT&P’s field service representatives concluded that the problem was due to the existing pipe clamps’ inability to firmly grip the pipe during expansion. This exposed the pipes to atmospheric moisture, resulting in both heat loss and deterioration. To alleviate the situation, PT&P designed secured pipe clamps that were bolted and torqued such that the entire pipe shoe would move with the pipe’s expansion. PT&P’s field service team also provided on-site installation of the replacement pipe shoes. The entire process involved stripping of the existing damaged insulation, removal of the failing supports, and installation of new pipe shoes and insulation.
Over 160 pipe shoes were engineered, manufactured, and installed for this energy center. The fabricated pipe shoes, designed for pipe sizes ranging from 12 to 28″ in diameter, are equipped with special base plate and slide bearing plate combinations which allowed axial movement from 1/2″ to 7″ and lateral movement up to 10 1/2″. In addition, they were designed to support a maximum vertical and lateral load of 38,000 lb. and 7,600 lb. respectively.Read More