F-Type Variable Springs for a Refinery in Oklahoma

June 26, 2017

F-Type Variable Spring Cans for a refinery in Oklahoma

Type: Variable Spring Supports
Size: 70 7/8″ tall and 17 3/4″ wide
Material: Carbon Steel and PTFE Slide Plates
Design: 30,980 lb. load/2,083 lb. spring rate
Testing: 35,000 lb hydrotest

PT&P manufactured variable spring supports for a refinery in Oklahoma. These F-Type PTP-6 spring cans are 70 7/8″ tall and 17 3/4″ wide. They are completely fabricated from carbon steel with PTFE slide plates welded on the load flange and internal guide. They are designed for an operating load of 30,980 lb. .with a spring rate of 2,083 lb./in. and 0.49″ of movement. These variables were hydrotested with a load of 35,000 lb. prior to shipment.

Read More

3-Layer Cryogenic Pipe Shoes for a Light Hydrocarbon Chemical Plant in Texas

June 10, 2017

3-Layer Cryogenic Pipe Shoes for a Light Hydrocarbon Chemical Plant in Texas

Type: Pre-Insulated Pipe Supports for Cryogenic Temperatures
Size: 5.5″ of Insulation / Clamps are 12″ wide
Material: Polyurethane Foam and Carbon Steel with HDG Finish
Design: 18″ Pipe and Cryogenic Operating Temperatures
Testing: Standard Quality Control Tests

These 3-layer pre-insulated cryogenic pipe shoes were custom fabricated by Piping Technology& Products for a light hydrocarbon chemical plant in Texas. The insulation foam is made from polyurethane and the rest of the shoe components from carbon steel with HDG finish. The cold shoes are designed for 18″ pipe, the 3-layers of insulation total is 5.5″ thick, the clamps are 12″ wide, and cryogenic operating temperature. Standard quality control tests were performed prior to shipment.

Read More
Top