Injection-Molded Anchors for an LNG Plant

June 27, 2007
Injection-Molded Anchors for an LNG Plant
Injection-Molded Anchors for an LNG Plant
Injection-Molded Anchors for an LNG Plant
6″ NPS Anchors

These supports are used in a re-gasification terminal and are designed for -29°C ambient and -196°C fluid temperatures. The polyurethane foam insulation is injected into a mold with a pipe spool in place to ensure maximum fit. The pipe anchors are made from 516 Grade 70-N carbon steel. These supports were put through Finite Element Analysis and inspected by our Quality Control Department.

42″ NPS 20″ NPS 6″ NPS
Axial Load: 136,000 lb. 62,500 lb. 9,773 lb.
Vertical Load: 40,000 lb. 14,773 lb. 5,682 lb.
Lateral Load: 15, 909 lb. 11, 364 lb. 2,273 lb.
Foam Density: 32 lb. PCF 32 lb. PCF 20 lb. PCF

Want to learn more about pre-insulated supports? View a pre-insulated support webinar today!


access-our-webinar-archives



Read More

42" Large Bore Pipe Saddles

June 13, 2007
42" Large Bore Pipe Saddles
42" Large Bore Pipe Saddles
42" Large Bore Pipe Saddles
42" Large Bore Pipe Saddles
42" Large Bore Pipe Saddles
42" Large Bore Pipe Saddles

PT&P fabricated 42″ diameter large bore pipe saddles. All pipe saddles are designed to be used on flare lines for a crude expansion project. They are fabricated from A-36 carbon steel and hot dipped galvanized. Sizes range from 16″ – 48″ in diameter and 6″ – 15″ in height.

Do you require large bore pipe saddles in your current project? Get pricing today!
request-a-quote


Read More

Cold Insulated Pipe Anchors for an LNG Plant

June 6, 2007
Cold Insulated Pipe Anchors for an LNG Plant
Cold Insulated Pipe Anchors for an LNG Plant
Cold Insulated Pipe Anchors for an LNG Plant
Base Stop

Piping Technology & Products designed and fabricated 36″ diameter insulated pipe anchors that included base stops to prevent lateral and axial movement of the anchor.

The design of the insulated stop plates allows the anchor to withstand 63,000 lbs of axial load. The use of Polyurethane insulation allows for operating temperatures down to -300°F.

Do you require insulated pipe anchors for your piping system? Get pricing today!
request-a-quote


Read More
Top