Blog

F-Type Variable Springs with Rollers
August 30, 2022

 

F-Type Variable Spring Support & Pipe Roller Assemblies Designed for a Fabrication Company in Texas

Type: Variable Springs w/ Rollers
Size: Springs: 11.1/16″ H | Rollers: 24″ -36″ Dia.
Design: 700-15,970 lb. Loads | 650°F Temp.
Material: HDG Carbon Steel | Cast-iron
Testing: Standard Load Testing & Q.C. Inspection

Variables use coiled springs to support a load and allow movement. The resistance of the coil to a load changes during compression, which is why these devices are called "variables". We offer a variety of different designs of variable spring pipe supports. View Variable Spring Supports Product Section.
For this application, the variable spring with rollers were used in natural gas compressor stations in Texas. Compressor stations are an essential part of a natural gas pipeline that moves natural gas from one location to another. At these stations, natural gas is re-pressurized and sent back into the pipeline system where it travels until the next compressor station. The location and distance between compressor stations is dependent on terrain, and the number of gas wells in the vicinity. Frequent elevation changes and a greater number of gas wells will require more compressor stations.
The compressor station, also called a pumping station, is the "engine" that powers a long-distance natural gas pipeline. As the name implies, the station compresses the gas (increasing its pressure) thereby providing energy to move it through the pipeline. The compressor is driven by a motor fueled by some of the natural gas bled from the pipeline. The size of the station and the number of compressors (pumps) varies, based on the diameter of the pipe and the volume of gas to be moved.
Piping Technology and Products and its subsidiaries provide products and services to this critical piece of the energy infrastructure with not only variable spring supports with rollers showcased here, but also with insulated supports, expansion joints, pipe shoes, guides, and anchors.

PT&P REF. ORIGINAL POST 02172020

Read More

Custom Designed Constant Spring Supports for a Chemical Plant in Singapore
August 23, 2022

Custom Designed Constant Spring Supports for a Chemical Plant in Singapore

Type: Constant Spring Supports
Size: 15-¼” W x 17″ H x 46″ L with 9-¼” OD
Material: Carbon Steel | Hot-dipped Galvanized
Design: 2,379 lb. Load | 10″ Upward Movement

PT&P custom designed and manufactured constant spring supports for a chemical plant in Singapore. The constants are fabricated from A36 carbon steel and include alloy coil springs. The dimensions are 15-¼” W x 17″ H x 46″ L with 9-¼” OD. They were designed for an operating load of 2,379 lb. and movement of 10” upward and were specially designed to incorporate “telescoping spring coil housings ” and painted to protect against corrosion. Standard load and travel tests were performed prior to shipment. As part of the standard quality control process, we test every constant that we build before it is shipped. We are ISO-9001:2015 Certified by DNV GL. Last year we built over 1500 constants alone for our customers. Some were designed to support loads up to 150,000lbs with movements over 48 inches.

These specific constants were for a plant that manufactures industrial gasses such as hydrogen, carbon monoxide, and synthesis gasses. Constant spring assemblies are used in a variety of applications ranging from CDU (crude distillation units), hydrocracking units, RFCC (residual fluid catalytic cracking), naphtha hydrotreater and hydrodesulfurization units (also known as alkylation units), and sulphuric acid regeneration (SAR) units in refineries, LNG, Geothermal, Coker units, HRSG units, and other facilities where there is substantial thermal growth in the piping. They can be configured to accommodate horizontal or vertical movement.

Constants use a spring coil (or set of coils) to accommodate pipe movement from the initial (installed) condition to the final (operating) condition of the piping system. For all constant spring supports there is no difference in the load to be supported. Instead, these spring supports are designed to accommodate movement due to thermal expansion or contraction. PT&P has set up its manufacturing department to offer an unparalleled set of customization options with minimal impact on delivery timeframes. In addition to our standard (hot-dipped galvanized, neoprene coated spring coils) variable spring supports, we can customize any material, finish, dimension, load, load adjustment, travel, travel stops, and provide sensors for remote monitoring.

PT&P REF. ORIGINAL POST 12112018

Read More

Compact Springs for a Chemical Manufacturing Plant for Agriculture
August 16, 2022

Compact Spring Supports Custom-Designed for a Chemical Manufacturing Plant for Agriculture

Compact spring supports (also known as disc springs) were custom-designed for a chemical plant in the agricultural industry. We design each compact spring for specific applications. Usually, they are used in “tight” spaces where the conventional variable spring is too tall to fit the allowable space between the pipeline and supporting steel structures. In general, compact springs serve the same function as a conventional variable spring, to relieve vibration and stress in the pipeline and associated equipment. The springs supplied here are designed for loads ranging from 5,038 lb. to 15,144 lb. and spring rates from 5,904 lb./in. to 44,455 lb./in. Also, these disc springs were designed for thermal movement ranging from 0.011” to 0.46”. The assemblies are fabricated from 304 stainless steel and include Bronzphite® and stainless steel slide plates to lower the coefficient of friction due to lateral movement. Since there is lateral movement, the conventional variable spring would require “internally guided load columns”, however, these units incorporate a “guiding” feature within the spring’s design. They have an installed height of 10-1/2″ – 26”. Each assembly underwent load testing and other NDE and visual inspection by our QC department before shipment. Applications such as Skid Mounted Process Equipment, Pump and Control Skids, Skid Plants, and other types of Skid Packages where space is extremely limited are ideal applications for Compact Springs.

PT&P REF. ORIGINAL POST 07122021

Read More

Pipe Saddles Custom Designed for LNG Facility
August 3, 2022

 

Pipe Saddles Custom Designed for a Large Liquefaction Project at an LNG Facility

Type: Heavy-Duty Pipe Saddles
Size: Up to 48” Diameter
Material: A36 Carbon Steel
Testing: Q.C. Visual Inspection | Pipe Dimensional Tests

This week’s featured product, Piping Technology & Products, Inc. custom-designed heavy-duty pipe saddles for an LNG facility in Louisiana. The pipe saddles are part of a large liquefaction project and range in size. The largest pipe saddle will support a 48” diameter pipeline. They are fabricated utilizing A516 Gr70N low-temperature carbon steel base plates, and web plates. Standard Q.C., visual inspection with pipe dimensional tests were performed prior to shipment. A pipe saddle is a structure consisting of a saddle and integral base used to support the pipe by transmitting the load or forces to the adjacent structure. Since we are a custom fabrication shop, we specialize in the design and manufacture of pipe shoes and saddles to accommodate sloping lines, pipe elbows, hot and cold temperature lines, as well as storage tanks and pressure vessels. In addition to pipe saddles, we have also supplied a wide variety of pipe supports to LNG projects, as well as, Floating Rings. Below is just a brief list of supports supplied to LNG projects from our product portfolio:

Varibale Assemblies

Constants Assemblies

Pipe Hanger Hardware

Slide plates and wear pads

Snubbers, Sway braces

Cryogenic Insulated Shoes-G10 as well as PUF

Insulated Trunnions

Adjustable Pipe Stands

Our products have gone into all key components of LNG facilities ranging from the liquefaction plant, the flare lines, loading lines, the terminals, and storage tank facilities.

PT&P REF. ORIGINAL POST 01082020

Read More
Top