Pre-Insulated Pipe Supports for both Cryogenic and High Temperature Applications

April 25, 2013

This Webinar is over, view the recording at: Webinars

 

Cold ShoesExplore how Polyurethane foam is produced, from mixing polyols and isocyanates to inspecting the final product. Learn about anchor shoe testing, lateral load testing, compressive strength testing, and axial load testing. Increase your understanding of the value-added services that are offered by PT&P, and rest assured that your Pre-Insulated Pipe Support needs can be covered by our 24×7 web-based emergency services, providing field service, and quick-turn around time when you need it most.

The featured presenter, Jerry Godina has over 15 years experience as a pipe support designer and manages PT&P’s engineer training development program. He also inspects existing supports, consults on site remediation projects and oversees installation on a regular basis.

 

Read More

C-Type Variable Spring Support Assemblies Designed for an Oil Sands Mine

April 21, 2013

C-Type Variable Spring Support Assemblies Designed for an Oil Sands Mine

PTP-2 160 C-Type variable spring support assemblies were designed and fabricated for an oil sands mine in Canada. The variables are 8″-12″ diameter, 16″ to 32-1/2″ overall length, and designed for an operating load of 5590 lb. with an upwards travel of 0.787″. The variables were fabricated from carbon steel with a hot-dipped galvanized finish and standard load and travel testing was completed prior to shipment.

Read More

Custom Sway Brace and Variable Spring Assemblies Designed for an Aerospace Development Facility

April 8, 2013

Custom Sway Brace and Variable Spring Assemblies Designed for an Aerospace Development Facility

These custom designed sway braces and variable spring assemblies were designed for hanger duct work in an aerospace development facility. The assemblies measure 67-1/2″ long with a 14-1/8″ O.D. The variables are a modified F-type spring with a pivoting base and non-standard coil combination, including a nested spring design. The assemblies include fully adjustable travel stops and custom end brackets. They are fabricated from carbon steel and designed for load ranges between 1100 lb. and 9250 lb. with a spring rate of +/- 2.78″.

Read More
Top