Heavy Duty Yoke U-Bolt Pipe Clamps Designed for a Pipeline in Canada

January 24, 2015

Heavy Duty Yoke U-Bolt Pipe Clamps Designed for a Pipeline in Canada

These custom heavy duty Fig. 43 yoke u-bolt pipe clamps are designed for a pipeline in Canada. The yoke clamps are designed for 42″ diameter pipe sizes and are fabricated from hot-dipped galvanized carbon steel. They are designed to support a load of 27,500 lb. PT&P supplied a total of 28 assemblies in three weeks for this project. These yoke clamps went through finite element analysis and performance tests prior to shipment.

Read More

108" Dia. Storage Tank and Containment Tank Designed for a Chemical Plant in Texas

January 11, 2015

108

Sweco Fab., a division of PT&P, designed and fabricated this 108″ diameter storage tank that will be submerged inside a containment tank for a chemical plant in Texas. The storage tank is fabricated from 1/2″ thick SA516-70 carbon steel and is 240″ in length. The containment water tank measures 295″ L x 124″ W x 128″ H. The storage tank is designed for 100 PSIG at 130°F internally and 15 PSIG at 130°F externally. The storage tank was hydro tested for 1 hour at 150 PSI and a full radiography test was done prior to shipment.

Read More
Top