PT&P fabricated base insulated supports used to minimize thermal conductivity between the base and un-insulated lines. The support is designed with a carbon steel bottom and a stainless steel upper for cryogenic temperatures of -300°F. The insulation is made of 20 PCF polyurethane block. These supports are designed to handle lateral and axial pipe loads. They also include a wear pad for extra pipe reinforcement, which prevents local deformation of the pipe.
Do you require base insulated supports for project? Let us price them for you today!
These beam clamp assemblies are fabricated from carbon steel with a hot-dipped galvanized finish. The clamp is designed to support a pipe that is 10″ in diameter and is capable of loads up to 3,600 lb. The rod measures 7/8″ in diameter.
The function of the beam clamp assembly is to support the pipe and allow it to swing. The clamp requires no welding which allows for a quick and easy installation.
Do you require beam clamp assemblies in your project? Get pricing today!
PT&P is Now ISO 9001:2000 Certified (October 13, 2007) Piping Technology & Products, Inc. is awarded the ISO 9001:2000 certificate by DNV Certification, a division of Det Norske Veritas (DNV), for the Manufacture of Hot and Cold Pipe Supports. This certificate proves that PT&P’s Quality Management System has been certified against the best practice standard and is compliant.
The latest version of standards, ISO 9001:2000 is created by the International Organization for Standardization (ISO), who set international requirements for Quality Management Systems. By conforming to the Quality Management System, Piping Technology & Products, Inc. demonstrates predictability of internal operations and the ability to meet customer requirements. While becoming certified, a company can identify the areas that are most critical to operations through management system audits. Once problem areas are identified, measured, managed and improved, customer satisfaction will rise, staff responsibility and motivation will also experience growth.
– U-Type constant spring supports for a power plant in Thailand
– Fabricated from A36 carbon steel
– Dimensions = 25″W x 28″H x 80″L
– Load = 24,000 lb.
– 3″ of total travel upward
– Standard load and travel testing was performed
Want to learn more about constant springs? Instantly view a constant webinar today.