U-Type Constant Spring Supports Designed to Support Ducts in an Acid Plant

March 23, 2014

U-Type Constant Spring Supports Designed To Support Ducts In An Acid Plant

U-Type constant spring supports were designed to support ducts in an acid plant. The constants are fabricated from carbon steel, galvanized and painted for extra protection against corrosion. The U-type constants are designed to support piping from below. The base plate is 25-7/8″ wide and bolted directly to the top of the steel or floor. The assemblies measure 84″ in length and 22-1/2″ in height. They only have vertical movement subjected by 6-1/2″ total upwards travel and are capable of supporting a 13,489 lb. load. The constants underwent standard spring testing prior to shipment.

Read More

Variable Spring Supports Designed for a Coker Unit in an Oil Refinery

March 8, 2014

Variable Spring Supports Designed For A Coker Unit In An Oil Refinery

PT&P designed and fabricated D-type variable spring supports for a coker unit in an oil refinery in the UAE. The variables are designed for a special pipe diameter of 4-3/4″. The cans are fabricated from electro-galvanized carbon steel, and the springs are coated with an electrophoretic epoxy coating. The variable springs are designed for 2.79″ of upwards movement, 300 lb. at 81°F. Standard load test and a spring rate test was performed prior to shipment.

Read More
Top