399 Pre-Insulated Pipe Supports for a LNG Facility

June 29, 2010
Pre-Insulated Pipe Supports for 56" pipe size
Pre-Insulated Pipe Supports for 56" pipe size

Piping Technology & Products, Inc manufactured the pre-insulated supports with 4″ of insulation thickness for pipe sizes ranging from 36″ to 56″ in diameter.

Pre-Insulated Pipe Supports for 36" pipe size
Pre-Insulated Pipe Supports for 36" pipe size

The cold shoes were fabricated from a combination of 10 and 20 PCF of polyurethane insulation. They also include a vapor barrier, aluminum jacket, acoustic layer, and are coated with a hot dipped galvanized finish. The supports will be used for a project in North Africa.

Want to learn more about pre-insulated supports? Watch a recording of a past webinar!
access-our-webinar-archives


Read More

Custom U-Type Constant Spring Supports with Slide Plates

June 15, 2010
Custom U-Type Constant Spring Supports with Slide Plates
Custom U-Type Constant Spring Supports with Slide Plates

PT&P fabricated 12 constant spring supports of various sizes with PTFE, 25% glass filled slide plates. The smallest constant is 38.25″ length x 13″ width x 28″ height, and the largest is 52″ length x 19″ width x 28″ height. The designed loads vary from 13,264 lb. to 15,962 lb. and the total travel range is 2″ to 3″.

Do you require constants or slide plates in your piping system? Get a quote today!

request-a-quote

Read More

Custom Constant Spring Hangers and Pipe Clamps

June 8, 2010
Custom Constant Spring Hangers and Pipe Clamps
Custom Constant Spring Hangers and Pipe Clamps

The constant spring hangers are manufactured from A36 carbon steel and have custom 4-bolt pipe clamps due to heavy loads. The dimensions are 40″ length x 18″ width x 85″ height and are designed for a 1,784 lb. load with 10″ of travel. The constants will be used to support radiant inlet manifolds and have a unique paint applied due to the highly corrosive condition. The entire pipe hanger assembly went through load and travel testing prior to shipping.

Want to learn more about constant springs? Instantly view a past constant webinar!
access-our-webinar-archives

Read More

Pre-Insulated Pipe Supports for an LNG Plant

June 1, 2010
Pre-Insulated Pipe Supports for an LNG Plant
Pre-Insulated Pipe Supports for an LNG Plant

PT&P manufactured a total of 1,400 supports for an LNG project. 75 of those supports were cold supports completed in less than one week on an emergency basis. The cold shoes were fabricated from a combination of polyurethane foam, carbon steel metal straps, and an aluminum metal jacket for insulation. They are designed for temperatures as low as -300°F and pipe sizes ranging from 12″ to 36″ in diameter. The 36″ diameter shoes are designed for a vertical load of 102,000 lb. and the 12″ diameter shoes are designed for 36,000 lb. load.

Do you require pre-insulated supports in your piping system? Get a quote from us now!
request-a-quote

Read More
Top